On December 25, 2023, ** spokesperson Mao Ning said at a regular press conference that at least 13 people died in an accident at a Chinese-funded factory in Indonesia. It is understood that four Chinese employees are among them, and many others have been injured, and the injured have been sent to the hospital for treatment.
**In conjunction with the competent authorities and local people**, the embassy in Indonesia has been instructed to immediately verify the situation and carry out the disposal. The embassy has immediately activated the emergency response mechanism, coordinated with relevant departments to make all-out efforts to treat the injured, and ascertained the cause of the accident as soon as possible. The embassy also simultaneously instructed the enterprises involved to do a good job of follow-up disposal.
Fire reminder: steel smelters are relatively lower than most industrial industries, and the safety factor is lower, because there are often spark scattering, gas **, high-temperature melt splashing or leakage in high-temperature operations, etc., what are the four types of common steel smelter operation hazards?
Heat burns - the biggest hazard factor.
Carbon monoxide poisoning.
Soot dust. Mechanical damage.
In view of the above four common hazards, the corresponding operational safety protection measures are as follows:
1.High-temperature burns are mainly for the protection of the whole body, and it is recommended that the workers in front of the furnace wear high-temperature heat-insulating clothing (including high-temperature boot covers, high-temperature masks and high-temperature gloves). For example, if the ambient temperature is about 700 degrees Celsius, then it is recommended to buy a high temperature insulation clothing with a resistance temperature of 1000 degrees Celsius. In addition, in the hot summer operation, considering the poor air permeability of wearing high-temperature heat-insulating clothing, the temperature inside the heat-insulating clothing is high, it can be appropriately used at the same time as the cooling vest, which can reduce the human body temperature to a certain extent and make it more comfortable.
2.To prevent carbon monoxide poisoning, we can consider the following two aspects, one is to regularly check the airtightness of the equipment, and the conditional smart equipment can also be equipped with alarms and pay attention to natural ventilation;Second, the job is equipped with a carbon monoxide gas mask, try to achieve one person, in the furnace operation, once in accordance with the rules and regulations of the operation, wear a carbon monoxide gas mask before operating the next step.
3.Dust protection, this is mainly for respiratory protection, while improving the working environment, you can wear industrial dust masks or dust masks. When choosing dust masks, it is necessary to pay attention to the filtration efficiency of dust particles, and the products to be selected must be qualified products that have passed the national LA certification.
4.Mechanical injury is much smaller than the other three types of hazard factors, the most important thing for mechanical injury is to carry out regular maintenance and inspection of the equipment, in addition, if some special links need to be manually handled, personnel try to wear safety shoes to work. (*Hubei** Fire Fighting).