Hunan Yuansheng Environmental Protection Equipment*** In 2011, it took the lead in the successful development of 10 kg of high-power (model) electrolytic chlorine dioxide generator in China, and obtained the corresponding qualification certificate, bidding farewell to the technical limitations of not being able to produce more than 5 kg of high-power (model) electrolytic chlorine dioxide generator in China, Yuansheng intelligent electrolytic chlorine dioxide generator has 12 patent certificates, and Yuansheng intelligent series electrolytic chlorine dioxide generator is widely used in water plants, sewage treatment plants, hospital sewage and other fields of disinfection, in Beijing Tongzhou Taihu Water Plant, Beijing Tongzhou Songzhuang District Water Plant, Gansu Jiayuguan Water Plant, Shaanxi Xunyi Tuqiao Water Plant, Guizhou Fuquan Water Group, Guizhou Panzhou Power Plant, Zhangjiajie Zhonghu Water Plant, Heilongjiang Fufu Hospital, Baotou Shiguai District Water Plant and other thousands of users. Yuansheng Intelligent Introduction to Electrolytic Chlorine Dioxide Generator Operation and Use Instructions:
1. Operating procedures for the first start-up.
1) Open the main valve of the water supply line to the generator.
2) Open the salt filling port, add xx kg of salt for the first time, and then tighten the salt filling mouth.
3) Open the water inlet valve of the salt tank and the water inlet valve of the cathode box on the front operation panel of the equipment at 45 degrees, and add water to the salt tank and cathode box until the liquid level is on the upper line (do not exceed the liquid level upper line).
4) To power the equipment, first make sure that the switch on the operation panel before the electrolytic power supply is turned off, and plug the power plug into the power outlet.
5) Turn on the switch on the front panel of the deviceTurn the available chlorine production setting knob to set the available chlorine output.
6) When other conditions are stable, the yield is proportional to the electrolytic current. Therefore, the electrolytic current can be set according to the actual needs.
7) Check whether there is leakage in the pipeline, if leakage occurs, the operation should be stopped immediately and the pipeline should be overhauled and maintained.
8) When the above operations are normal, the initial start-up operation of the electrolytic chlorine dioxide synergistic disinfectant generator is completed.
2. Daily operating procedures.
1) Add salt, check whether there is a lack of salt through the salt observation port every day, such as salt shortage, add 50 kg of salt to the equipment each time.
2) Add water, check whether the equipment is short of water once a day, if there is a shortage of water, open the corresponding valve 45 degrees to replenish the equipment (the water replenishment should not exceed the liquid level line).
3) Effective chlorine output setting, according to the specific conditions such as residual chlorine value and water supply measured by the factory water, turn the effective chlorine output setting knob.
4) Set the available chlorine production (the set value of available chlorine production is 2 tons of water supplied per hour).
3. Shut down. 1) Turn the switch on the front control panel to the off setting.
2) Close the main valve of the water supply line to the generator after two hours.
3) Unplug the power supply.
Promotion] Disclaimer: This article is this **publication or **corporate promotional information, only represents the author's personal views, and has nothing to do with this website. The content of the article is for readers' reference, please verify the relevant content by yourself. ）