First of all, there are certain steps and precautions to follow when operating an industrial dryer. The following are the specific operation steps: Preparation stage: Before operating the industrial dryer, you need to prepare the required items, such as the items that need to be dried, the drying basket, etc. At the same time, check that the power of the dryer is turned on and make sure that the dryer has been thoroughly cooled before use.
2.Loading phase: Place the items that need to be dried in the drying basket and make sure they are evenly arranged so that the air can circulate better. Then, place the drying basket in the dryer and close the door of the dryer. 3.Setup phase: After the dryer door is closed, the appropriate drying program and temperature need to be set according to the items being dried and the desired drying time. These settings can usually be done on the control panel.
4.Start-up phase: Once the setup is complete, the industrial dryer can be started. At this point, the dryer starts working and dries according to the set program and temperature. 5.Monitoring phase: During the drying process, the operating status of the dryer needs to be monitored at all times to ensure that it is working properly. The status of the dryer and related information can be viewed via the display screen or indicator light on the control panel. 6.End Phase: When the drying time is over, the dryer will automatically stop working. At this point, you can open the door of the dryer and take out the items that have been dried. 
In addition, there are a few things to be aware of. For example, when using an industrial dryer, make sure it is placed on a flat ground and away from flammable materials. At the same time, the dryer should be regularly maintained and maintained to ensure its normal operation and service life. In conclusion, there are certain steps and precautions to follow when operating an industrial dryer. Its performance and effectiveness can only be fully utilized if it is used and maintained correctly.