In our daily lives, we may encounter situations where we need to disassemble our air conditioners. Whether it is moving, cleaning or repairing, it is very necessary to master the correct methods and steps to remove the air conditioner. Below, we will explain in detail the methods and steps of dismantling the air conditioner, so that you can easily become an expert in dismantling the air conditioner.
1. Preparations.
Before you start disassembling your air conditioner, first make sure that you are well prepared. You need to prepare some basic tools such as screwdrivers, wrenches, hammers, etc. At the same time, protective equipment such as gloves and goggles is also required to ensure safety.
2. Turn off the power.
Be sure to turn off the power before you start disassembling your air conditioner. This is to ensure that no electric shock accidents occur during the disassembly process.
3. Disassemble the outdoor unit.
First, find the fixing screws of the outdoor unit and loosen them with a screwdriver.
Then, use a wrench to loosen the connecting pipe clamp of the outdoor unit, taking care not to damage the connecting pipe clamp.
Next, gently tap the bottom of the outdoor unit with a hammer to loosen it.
Finally, carefully remove the outdoor unit.
4. Disassemble the indoor unit.
Locate the fixing screws of the indoor unit and loosen them with a screwdriver.
Use a wrench to loosen the clamp connecting the tube of the indoor unit.
Gently hold the bottom of the VTH with your hand and hit the top of the VTH with a hammer to loosen it.
Carefully remove the VTH.
5. Disassemble the filter.
Find the location of the filter and remove it.
Wash the filter with clean water, taking care not to damage the filter.
Allow the filter to dry and reinstall it.
6. Precautions.
During the disassembly process, pay attention to safety and do not touch the electrical part.
When disassembling, handle with care to avoid damaging the air conditioner parts.
When cleaning the filter, do not use too much force to avoid damaging the filter.
When installing, make sure that all parts are installed securely to avoid failure during use.