What do I need to pay attention to before renting a car by car?People who have rented a car may know this, and people who have not rented a car may not know. So what do you need to pay attention to?
1. Simply ask about the condition of the vehicle before getting into the car: After renting a car, you must first understand the current condition of the vehicle, especially whether the operating system is sensitive.
Pay special attention to the areas that are prone to problems, especially the brakes, steering, lights, etc. It directly affects driving safety.
Also, inspect the fuel, coolant, lubricating oil, brake fluid, and major components of the drivetrain.
If necessary, you should also take a test run, be familiar with and check the working conditions of the clutch, accelerator, brake and engine, and explain the problem to the owner in time.
Especially if you rent a car from a self-driving car rental company, you need to check it carefully, and even some minor faults need to be explained clearly.
You can't just look at it and drive away. One is to avoid traffic accidents, and the other is to reduce the hassle when returning the car.
2.Find out where all the instruments and operating systems are: Once you're in the cab, first adjust the driver's seat position that suits you, and then familiarize yourself with the functions of each instrument and the position of the operating components from left to right.
In order to grasp the location of the instruments and operating parts, first of all, you can read the vehicle manual and figure it out one by one according to the manual.
Especially imported cars, there are many auxiliary instruments, which are difficult to understand at once, so they must be carefully checked.
Second, in the absence of instructions, you can directly understand the owner of the car to avoid being distracted by groping while driving.
In particular, the position of switches, horns, wipers, light switches, automatic door locks, meters, and various warning lights.
3. Start the vehicle and operate it a few times: Before going on the road, you should operate the operating parts mentioned earlier a few times.
This not only helps to remember where they are, but also to check how well they are working and, more importantly, to avoid operational confusion while driving.
For example, the light control switch, some are screwed, some are pulled, and some are pushed;
Some of the reverse gears are pushed directly, and some are pressed down first, and then pushed;Rain.
The brush switches are either on the steering wheel or ...... on the dashboardThese need to be operated a few times before they can be applied freely and avoid mistakes in driving after traveling.