The T10 is a passive two-way loudspeaker with two 6s5-inch LF driver and 1 x 14-inch high-frequency compression driver unit and passive crossover network.
The T10 can be used as a line array or as a strong directional point source loudspeaker.
The high-frequency compression driver is equipped with a unique waveguide horn that allows the T10 to form a vertical line array with a horizontal coverage angle of 90° and a constant directivity lower limit frequency of approximately 600Hz
The T10 is equipped with an acoustic lens in front of the horn to increase the horizontal dispersion of the T10 to 105°, and when the horn is rotated 90°, it can be used as a 90° x 35° (horizontal x vertical) highly directional point source.
The T10 cabinet structure is made of sturdy polyurethane, with a layer of impact-resistant paint on the cabinet surface, and the front panel of the loudspeaker is protected by a sturdy metal meshThe front is covered with an interchangeable layer of acoustically permeable foam, and the rear panel is fitted with a pair of EP5 or NL4 parallel connectors.
The T10 cabinet is also equipped with a complete linear rigging and load-bearing bolts.
Data components: 2 x 65" / 1 x 1.4"
SPL (1 m, free soundfield) 1D12 Drive: 130 dB SPL point source setting, 132 dB SPL line array setting
SPL (1 m, free sound field) 1 d6 drive: 127 dB SPL point source setting, 129 dB SPL line array setting
Power rating (rms peak 10 ms): 200 800 watts
Frequency response (-5 dB): 68 1202 Hz - 18 kHz
Directivity (point source, horizontal x vertical): 90° x 35°
Pointing characteristics (line array, horizontal): 105°
Splay angle setting: 0 - 15° (in 1° steps).
D6 D12 Number of enclosures per channel: 4
Dimensions mm (H x W x D): 197 x 470 x 300mm
Weight : 11 kg.