"Thick film blister is widely used in various industries as a common packaging material. In order to extend its service life and keep it new in appearance, proper maintenance and maintenance are crucial. This article will introduce you to the thick film blister maintenance guide to help you effectively protect and manage blister products. 1. Clean and keep dryRegular cleaning: Gently wipe the blister surface with a soft damp cloth or sponge to remove dust and stains. Do not use harsh and corrosive cleaning agents to avoid damaging the blister surface. Avoid wet environments: Thick sheet blisters are sensitive to humid environments, so prolonged exposure to humid environments should be avoided as much as possible. When storing and displaying blister products, choose a dry and ventilated place to avoid moisture. Prevent contact with chemicals: Avoid direct contact with chemicals, such as acids, alkalis, solvents, etc. These chemicals can cause discoloration, deformation or breakage of the blister.
2. Avoid high temperature, avoid direct sunlight and avoid high temperature environment: thick film blister is more sensitive to high temperature, so blister products should be avoided in a high temperature environment as much as possible, such as a car exposed to direct sunlight, near the heater. High temperatures can cause deformation, softening or fading. Direct sunlight: If the direct sunlight is too long, the surface of the blister will turn yellow and brittle. When storing and displaying blister products, choose to avoid direct sunlight or take shading measures such as curtains and sun visors. 3. Avoid heavy pressure and collision to avoid heavy pressure: thick film blisters are prone to deformation and scratches when they are under heavy pressure. During the storage and handling of blister products, it is necessary to avoid heavy objects being stacked directly on the blister, so as not to damage the product. Collision prevention: Avoid the blister product from hitting sharp or hard objects, and avoid scratching or damaging the blister surface. During the carrying and use of blister products, they should be handled with care and pay attention to avoid bumping. 4. Regular inspection and repair regular inspection: Regularly inspect the surface of blister products to check whether there are scratches, cracks and deformations. If an abnormal phenomenon is found, appropriate measures should be taken to repair it in time to prevent the problem from further expanding. Repair measures: Minor scratches can be repaired with a suitable polish. For serious damage or deformation, it is recommended to find a professional blister repair service to ensure the repair effect and reliable product. 5. Reasonable storage and packagingProper packaging: In the process of storage and transportation of blister products, appropriate packaging materials such as foam board, bubble wrap, etc. are used to provide additional protective cushioning effect. Avoid direct contact between blister products and sharp objects such as hard objects. Vertical storage: Thick sheet blisters should be stored vertically to avoid long-term gravitational pressure. Vertical storage also saves storage space and facilitates the access and management of blister products. In summary, correct maintenance and maintenance can prolong the service life of thick film blister and keep the appearance novel. Regular cleaning, avoid high temperature and direct sunlight, avoid heavy pressure and collision, regular inspection and repair, and reasonable storage and packaging are several aspects that cannot be ignored in the maintenance of blister work. Complying with these maintenance guidelines can effectively protect and manage blister products and ensure the quality and reliability of blister products during long-term use. "