It's been a long time since I've sorted out the article on the pickup roller shutter cover, which belongs to the modified functional parts and appearance parts as one of the pickup modified products, a little bit of a few happy and a few sad.
What is happy is the advantages of the roller shutter cover itself, such as improving the use of the carriage, protecting the function of the carriage, and meeting the needs of households, travel, and pulling goods, which are functional performances. At the same time, the black spraying process of the roller shutter cover itself, black is a versatile color, whether the body is black, yellow, blue, red, etc. At the same time, the black tone is characterized by calmness, so the overall loading effect is much higher than that of other colors, and it also plays a role in enhancing the appearance of the vehicle. In addition, the roller shutter cover can reduce the effect of the wind resistance of the pickup truck body, and the wind resistance is reduced, and the wind noise is naturally reduced.
The coin has two sides, and the pickup roller shutter cover naturally has a worrying side, such as the roller shutter box occupies a part of the compartment space, which is determined by the characteristics of the product, and is a situation that is temporarily powerless to change. At the same time, there is also a place worth paying attention to the roller shutter cover, that is, water leakage, once there is a leakage point, it is often not as simple as water entering the carriage, involving goods, and the corresponding remedies, some remedies are more troublesome, which is indeed a difficulty.
Looking at the various back covers of pickup trucks, waterproofing has always been the main point of the points, and this pumping time is slowly unfolding. Because the pickup roller shutter cover is an assembled product, coupled with its installation characteristics, it is necessary to pay more attention to waterproofing. This is related to the product process, installation skills and later use, especially the product process. After all, almost everyone can intervene in the later installation and use, and the product process can only be involved by the manufacturer.
Although since ancient times, the business is not one, but each process and raw materials are the key to the cost, and the manufacturing industry has long been not a profiteering industry, to maintain the original intention of the product, the inheritance of the craftsman spirit, is the basis of the roller shutter cover manufacturers.