In the process of using the special mold temperature machine for PE pipe production, the alarm is a very anxious thing, which indicates that the machine is going to break down or there is an abnormal situation when working and using, if there is really a problem, what should I do?If there is an alarm for the production of PE pipes, do not panic, first judge whether there is a lack of heat conductivity**, and then check whether the pump is overloaded, and check whether it is abnormal overtemperature, if it cannot be solved, please contact the mold temperature machine manufacturer.
What should I do if the special mold temperature machine for PE pipe production overtemperature warning?
When the mold temperature machine and related electric heating are overheated, the signal input by the thermostat prompts and warns. Don't worry about normal overtemperature, the temperature control controller can be adjusted unsteadily, and it will automatically recover after the normal overtemperature warningIf the temperature control controller is broken and needs to be replaced, the temperature controller may be broken and needs to be replaced, or the mold temperature machine has a false signal output.
What should I do if I encounter a false signal from the special mold temperature machine for PE pipe production?
Don't panic if there is a false signal, it worked normally before, and suddenly there is an alarm to analyze and then make a judgment. First judge whether there is a lack of heat conductivity ** (that is, lack of water or oil), and if there is a lack of water (generally a water temperature machine), adjust the pressure switch a little smaller;If there is a shortage of oil, the oil circulation system will be stopped, and the oil will be refueled!
If it is not a lack of media, check it again for overload;If the pump is overloaded, you can increase the current ampere of the overload. Finally, check whether the temperature is abnormally over-temperature, whether the temperature control is broken, if it is the above situation, remember to contact the mold temperature machine manufacturer in time, although the mold temperature machine is safe, but it involves internal wiring and internal components to check the words is not the text can be said clearly;In addition, if you lack common sense to remove the shell of the mold temperature machine by yourself, it is easy to get frostbite or scald if you directly contact the internal pipes, so please contact the mold temperature machine manufacturer in time if you will not deal with it after the mold temperature machine fails.