As dust accumulates on the surface of the filter media, the efficiency and resistance of the collector will increase accordingly. When the pressure difference between the two sides of the filter media is large, some fine dust particles attached to the technical parameters of the dust collector bag will be squeezed through, thus reducing the efficiency of the dust collector. In addition, the high resistance of the dust collector will significantly reduce the airflow of the dust collection system. Therefore, after the resistance of the dust collector reaches a certain value, the ash should be cleaned in time. The initial layer must not be damaged during the ash removal process to avoid reducing efficiency.
Flumex high-temperature dust bag.
1. The temperature is high and the temperature fluctuates greatly
2. High acidity, alkalinity, strong corrosive working conditions;
3. Fine and high temperature dust filtration and precious metal materials**;
4. High adhesion or humidity, no membrane filter material is used.
Flumex high-temperature dust bag.
The abrasion resistance, flexural resistance and tensile strength of the fluoromex bags are significantly improved, and the maxus filter bags are able to withstand high filtration loads. The filtration rate is high and the frictional resistance in operation is low. Compared with the generated chemical fiber heat-resistant filter material, the fluoromex dust removal filter bag gets rid of the shortcomings of elongation, large deformation, low high temperature resistance and poor corrosion resistance of chemical fiber filter materialIts specification reliability and compressive strength are good, and the cost is lower than other heat-resistant organic chemical brazing.
Flumex high-temperature dust bag.
Applicable fields: cement rotary kiln (kiln head, kiln tail), vertical kiln tail, blast furnace gas purification, ferroalloy smelting furnace, garbage incinerator, power plant coal-fired boiler, etc.
Jiangsu Fengxinyuan Environmental Protection Group *** dust filter bag production base, located in No. 10, Funing Filter Material Industrial Park, Jiangsu Province, produces filter bags, dust filter bags, dust removal bags, needle felt, Metas needle felt, fluoromex needle felt, pps needle felt, polyester needle felt, glass fiber needle felt, anti-static needle felt, water and oil repellent polyester needle felt, acrylic needle felt, P84 needle felt, PTFE composite needle felt, PTFE filter bag, PPS filter bag, fluoromex filter bag, Metas filter bag, [PPS+PTFE fiber backing] filter bags. The products are widely used in the production and production of dust removal filter bags under harsh working conditions such as electric power, metallurgy, biomass, waste incineration, solid waste disposal, municipal waste dust collection, chemical dust removal, etc., as well as the manufacture of cage skeletons, laminating, coating, water and oil repellent, and anti-static series production and processing