For more information, proofing, technical support, technical data about PIC16F1825-E SL, please search us.
The PIC16F1825-E SL is a high-performance RISC CPU: Learn only 49 instructions:- All single-cycle instructions except branches Operating speed: -DC 32 MHz oscillator Clock input -DC 125 ns instruction cycle Up to 16 KB linear program memory addressing Up to 1024 bytes of linear data memory addressing Interrupt function with automatic context saving 16-level deep hardware stack with optional overflow Undercurrent Reset Direct, Indirect and Relative Addressing Modes: - Two full 16-bit File Selection Registers (FSRs) - FSRs can read program and data memos.
PIC16F1825-E SL Flex Oscillator Structure: Precision 32 MHz Internal Oscillator Block: - Factory Calibrated to 1%, Typical - Software Selectable Frequency Range from 31 kHz to 32 MHz 31 kHz Low Power Internal Oscillator Four crystal modes up to 32 MHz Three external clock modes up to 32 Hz 4 Phase-Locked Loops (PLLs) Fail-Safe Clock Monitor: - Allows safe shutdown when the peripheral clock is stopped Two-speed oscillator starts Reference Clock Module:- Programmable clock output frequency and duty cycle.
The PIC16F1825-E SL has special microcontroller features: 18v-5.5V Operation - PIC16F1825 1829 18v-3.6V Operation-PIC16LF1825 1829 Self-Programmable Under Software Control Power-On Reset (POR), Power-On Timer (PWRT), and Oscillator Start Timer (OST) Programmable Brownian Reset (BOR) Extended Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP) via Two Pins Debug via Two Pins (ICD) Enhanced Low-Voltage Programming (LVP) Programmable Protection Energy-saving sleep mode.
Very low power management PIC16LF1825 1829 with XLP: Sleep mode: 20 na@18V, Typical Watchdog Timer: 300 na@18 volts, typical Timer1 oscillator: 650 na@32 kHz, 18V, typical?Operating current: 48 A mhz@18v；Typical Analog Functions: Analog-to-Digital Converter (ADC) Module: -10-bit resolution, up to 12 channels-Automatic acquisition function-Conversion during sleep Analog Comparator Module: -Two Rail-to-Rail Analog Comparators-Power Mode Control-Software Controllable Hysteresis Voltage Reference Module: -1Fixed Voltage Reference (FVR) for 024V, 2048v and 4096V Output Level - 5-Bit Rail-to-Rail Resistive DAC with Positive and Negative Reference Selection Peripheral Highlights: Up to 17 I.O. Pins and 1 Input Pin Only: - High Current Sink Source 25 mA 25 mA - Programmable Weak Pull-Up - Programmable Switching Pin Interrupt Timer0: 8-Bit Timer with 8-Bit Prescaler Counter Enhanced Timer1: Dedicated, low-power 32 kHz oscillator driver with prescaler - external sector input mode Three Timer2 Types: 8-Bit Timer with 8-Bit Cycle Registers Counters, Prescalers, and Postscalers Two Capture, Compare, PWM (CCP) Modules Two Enhanced CCP (ECCP) Modules: - Software Selectable Time Base - Auto Shutdown and Auto Restart - PWM Steering Up to two Primary Synchronous Serial Ports (MSSP) with SPI and I2CTM with: -7-bit address shielding - SMBus PMBUSusTM compatibility Enhanced Universal Synchronous Asynchronous Receiving Transmitter (EUSART) Module Mtouch Sensing Oscillator Module: - Up to 12 input channels.