ZHR22050 5 Precautions for the characteristics of the DC screen charging module

Mondo Technology Updated on 2024-01-29

ZHR22050-5 DC screen charging module is a device specially used in DC power supply system. It is commonly used to provide a stable DC voltage to DC power supply equipment to ensure the proper operation of the equipment.

Here are some of the main features of the ZHR22050-5 DC screen charging module:

Input voltage range: The module has a wide input voltage range, usually 380-420VAC 28A, which makes it able to work normally under different power supply conditions.

Output voltage and current: The output voltage of this module is 220VDC 50A, or equivalent. This means that it is able to provide a stable 220V DC voltage and has a large current output capacity to meet the power needs of different devices.

Voltage regulation accuracy: The voltage regulation accuracy of this module is high, usually 05%。This ensures the stability and accuracy of the output voltage to meet the normal operation requirements of the equipment.

Ripple: This module has a small ripple, usually 01%。Ripple refers to high-frequency noise or fluctuations in the AC voltage, and the module has a smaller ripple that makes the output voltage more pure.

Protection function: The module has protection functions such as over-voltage, under-voltage, phase loss, short circuit, and over-temperature. These protection functions can ensure that the module will not be damaged in abnormal situations, and can cut off the power supply in time to protect the safety of equipment and personnel.

When using the ZHR22050-5 DC screen charging module, you need to pay attention to the following points:

Make sure that the input voltage is within the specified range to avoid damage to the module caused by exceeding the range.

Ensure that the output current does not exceed the rated value to avoid overload causing damage to the module or equipment failure.

Regularly check whether the operating status and protection function of the module are normal, and find and solve problems in time.

Comply with relevant regulations and operating procedures during use to ensure the safety of personnel and equipment.

Related Pages