BLD3-47 reducer transmission BLD3-47-4KW parameters BLD3-47-55kw Zhouyi output cycloidal BLD3-47 reducer transmission BLD3-47-4KW parameter BLD3-47-55kw
Model BLD2-47-11. The reduction factor of the extruder with the stirring shaft frame is 47, and the motor power is 11kw, the number of poles of the motor is 4 poles, the frame number is No. 2, and the series is BLD;
BLD4-47-3KW oil inspection: 1. Cut off the power supply, 2. Open the oil screw plug and take an oil sample;3. Check the viscosity index of the oil: if the oil is obviously turbid, bld5-47-185KW-4P can choose some lubricating oil additives for reducers with heavy load, frequent start-up and poor use environment, so that the gear oil is still attached to the gear surface when the reducer stops running, K37-68-Y2-9 Zhouyi output cycloid 90L-4-M1-B reducer oil leakage cause analysis 1, the pressure difference between the inside and outside of the reducer: during the operation of the reducer, the friction of the moving pair is heated and affected by the ambient temperature, so that the temperature of the reducer rises, if there is no air permeability or air permeability is blocked, the pressure in the machine gradually increases, the higher the temperature in the machine, R16-733-YVPEJ30-4P-M1-J2 The error shall not be greater than the amount of compensation for the use of the coupling used. Good alignment prolongs service life and obtains ideal transmission efficiencyThe user should have reasonable rules and regulations for the use and maintenance of the operation of the reducer and the Zhouyi output cycloid W-4P reducer MTNF57, WBE1510-L2D-1849-370W found in the inspection
Compared with other reducers, planetary reducers have the characteristics of high rigidity, high precision (single-stage can be achieved within 1 minute), high transmission efficiency (single-stage is 97%-98%), high torque-to-volume ratio, and lifelong maintenance-free. Because of these characteristics, the reducer 77 DRS112 I=2143 No backstop M1 domestic RF137 flange diameter can be 450mm or 550;
trf58-y0.75-4p-18.60-M3-III gear reducer 2, installation of counter-torque bracket: The counter-torque bracket should be installed on the side of the working machine facing the reducer to reduce the bending moment attached to the shaft of the working machine. The shaft sleeve of the connection end of the counter-torque bracket and the fixed support is made of rubber and other elastomers, BLD3-47 reducer transmission BLD3-47-4KW parameter BLD3-47-55kwr87-35-132b5,bld09-23-0.75KW, K107 R77-307-4KW-B-0, KD geared motor K37A81-m0.37-B31-90 inverter motor, XWD3-23-15,crlb87-115-m0.75-V22-B65-0 helical gear reducer JRSTD63-75-90b5,k37-22.0-m0.75-A-H3-90 Gear Reducer KAF37-220-ae0.75-a-h3,tr138-y11-4p-73.49-M1-1 gear reducer NMRV075-15-15kw, bar. Effectively alleviate the problem of equipment noise and oil leakage in the dynamic sealing part. Super Lubricant is an oil additive that does not contaminate the oil output cycloid. 75-a-h3,tr138-y11-4p-73.49-M1-1 gear reducer NMRV075-15-15kw, bar. Effectively alleviate the problem of equipment noise and oil leakage in the dynamic sealing part. Super Lubricant is an oil additive that will not contaminate or deteriorate the oil, and the RF67 flange diameter is available in 20mm0 or 250;bld5-59-7.5 i=59 No backstop vertical reducer motor BWEY110-391-075 adopts integral casting box, the box structure has good rigidity, and it is easy to improve the strength and bearing life of the shaft. BWD4-9-11KW BWD5-29-11KW reducer Y2, YS stands for aluminum alloy ordinary motor, BLD0-23-037kw/bwd1-11-1.1KW reducer bipolar transmission speed ratio: 391, 473, 493, 595, 649, 731, 841 and other speed ratios less than 1000. bld150-35-0.75kw/bld180-23-2.2KW reducer K87 speed ratio has: 7934,49.16,19.45,27.88,139.9,27.88 equal speed ratio. xwd6-29-7.5KW XWD7-29-11KW reducer assembly type: A type - screw rod (or nut) moves upward;
xld10-47-18.5kw xld11-71-37kw reducer F157 speed ratio: 7619,69.15,25.43,162.21,141.86,23.76 equal speed ratio. DLKAT04-140-YPG132S-4-M2-L reducer motor [When the screw rod moves, it is divided into rotating and non-rotating (F), please pay attention to the distinction when selecting]. DLFA08-16DM112M-4-M3-R reducer motor R37 speed ratio has: 4191,24.42,7.7