M238 alloy tool steel
I've always loved M238 alloy tool steel. Not only does it make your job perfect, but it also reduces wear and corrosion.
1: Characteristics of M238 alloy tool steel.
M238 alloy tool steel is a new type of composite high-density and high-strength material, which has excellent processing performance and good use characteristics. It is mainly composed of NB-CR-V intermetallic compounds, and its microstructure is: A--- molybdenum, ferro-molybdenum, chromium, manganese, carbon-tin (hereinafter referred to as A2B);b--- chromium, manganese, copper oxide, magnesium carbonate;c--- nickel-based transition phase;D--- magnesium aluminum (Si3H7) and other compositions. M238 alloy tool steels belong to precision casting steels, which are commonly used in mechanical manufacturing. M238 alloy tool steel has excellent mechanical strength and wear resistance, and can be widely used in various industrial fields, such as auto parts, metallurgical equipment, petrochemical industry, medical equipment, etc.
2: These are the quantities of steel for my M238 alloy tool.
My M238 Alloy Tool Steel Quantity: These are my M238 Alloy Tool Steel Quantities, you can choose different types of materials according to your needs. There are three commonly used specifications: 22xx22 and 24x50mm. For occasions where the thickness requirements are not very strict, 22 or 20 mm thick products can be used;If the working intensity is required, it is recommended to use 24x25 28 30 mm products. How to use these tool steels correctly?
1.Before you begin, make sure you're familiar with the properties and scope of application of the various tool steels.
2.Install the equipment according to the requirements on the manual, and adjust the spacing of the equipment.
3.Place the steel plate on the machine and gently compact it by hand.
4.Operate in an appropriate manner so that it is consistent with the relevant part.
5.Regularly check the quality of the workpiece, find problems in time and deal with them in time.
3: How to use and precautions.
1.M238 alloy tool steel has excellent wear resistance, corrosion resistance and oxidation resistance, and is widely used in machinery manufacturing, ** and other fields.
2.Application: When placing it on the workpiece, be sure to keep it flat and smooth to avoid scratching the surface.
3.Precautions: It must be fully dried before it can start working, and cannot be stored for more than 10 hours;During the operation, attention should be paid to observe whether the knife is rusty and corroded, and if found, the operation should be stopped immediately and replaced with a new knifeDo not mix the same material, so as not to produce ***
4.Service life: It can reach about 10,000-6,000 times according to different uses, but in fact it is difficult to be exactly the same, mainly because cast iron contains aluminum, which will release a lot of heat and reduce its hardness when peroxidized.
Hope you find these products helpful!If you have any questions or want to know more about them, you can do so on our website.