"Standardization of printed matter, numerical management, and improvement of production efficiency are important issues for all printing houses. "For example, in the case of repeated order prints, even in a printing factory where temperature and humidity are strictly controlled, if the same ink, paper, plate, printing press, and ink fountain are used, it is not possible to ensure that the consistency is consistent for each printing, and the adjustment of the density will lead to a delay in start-up, and it will also increase the excessive wear and tear of the paper. One of the main causes of this problem is the change in the nip spacing between the ink roller and the feed roller. The rubber roller is hardened or sags under the influence of isopropyl alcoholDue to the influence of UV ink, the rubber roller will swell, that is to say, the spacing of the rubber roller is constantly changing like a living creature, so it is an indispensable step to ensure the standardization of printed matter by regularly testing the spacing of the nip and making fine adjustments. However, until now, there has been no testing instrument that uses numerical management to detect nip spacing.
Features::
The spacing of the nip zone of the rubber roller is expressed in units of 1 mm.
It is measured with two sensors, left and right. Parallel rollers can be achieved with a simple operation.
By clamping the sensor in the middle of the roller, the nip spacing can be finely adjusted.
The time required for nip adjustment can be significantly reduced.
The adjustment of the nip spacing of the water roller is also very intuitive because it is expressed in a very intuitive value, which makes it very easy to adjust.
The printing operation achieves continuous and stable work, and all printing machines achieve standardized and unified management.
Product Technical Parameters:
Measurement range: 1-30mm
Measurement unit: mm inches
Measurement accuracy: 01mm
Measurement error: +-10%.
The wireless measurement range is 10m
Battery: Lithium coin cell battery CR2032
Total weight: 42g (including handle, battery, and sensor piece).
Machine size: 300*75*25mm
The measured value is displayed in real time via an app (tablet) wireless (Bluetooth) connection.