The difference between a master and an ordinary ** is mainly reflected in three aspects. First of all, in the face of uncertainty and **, the master will choose to wait and see, not rush to operate, and wait for the trend to be clear before entering the market. On the contrary, ordinary ** often operates frequently, resulting in frequent losses, and once it encounters a fierce main operation, the loss is even more serious. Secondly, the level of the master in the analysis of the disk is higher than the ordinary **, the probability of making mistakes is lower, even if there is a mistake, it can be quickly corrected, and the reaction speed is faster, do not make excuses for yourself. In the end, the master is good at waiting, waiting for the arrival of a big opportunity, and then making a decisive attack, while the ordinary ** has no patience to wait, is busy with trading every day, regards speculation as the highest principle, and cannot hold itself as soon as there is a wind and grass.
The inverted hammer line is a common pattern in the chart, which is characterized by a rapid stock price after the opening, but encounters resistance and falls, the price is still higher than the opening price, forming a long upper shadow (generally more than twice the physical line), and a short lower shadow or no lower shadow. According to the different entities, the inverted hammer can be divided into inverted hammer yang and inverted hammer yin. The inverted hammer bullish candle refers to the stock price rushing up and falling back at the opening, although the ** price is still higher than the opening price, but there is resistance above, and the pattern is weak. The inverted hammer yin line refers to the stock price rising and falling at the opening, and the ** price is lower than the opening price, indicating that the seller's power is greater than the buyer's power, which is also a weak pattern. The inverted hammer is similar to the shooting star in the top pattern in that both have the characteristics of a long upper shadow, but the two are significantly different in terms of pattern and trend. The inverted hammer appears in the *** process, which usually signals the emergence of a bottoming signal. On a trend, when an inverted hammer line appears, it often means a sign of a bottom.
The timing of the inverted hammer is usually in a tick pattern that is quick after the opening but encounters a pullback of resistance. The inverted hammer can also be used to predict the trend of **. When an inverted hammer line appears, it indicates a signal that the bottom has been reached. There are usually several situations in which the main rising wave occurs, including the stock price moving sideways or slowly rising, boll presenting a parallel narrow rail, the stock price running between the middle and upper rails, breaking through the middle rail on a certain day but gaining support at the lower rail, ** a few days later again to break through the upper rail;Or the stock price is sideways ** or slowly upward, boll presents a parallel narrow rail, the stock price runs between the middle rail and the upper rail, and suddenly accelerates to break through the upper rail one day, and the pocket mouth of boll is also open, and the probability of occurrence in these cases is larger. In addition, when the stock price has experienced a wave of sharp rises before, the bag mouth of the boll is also open, and when the boll closes, the stock price crosses up from below the middle track, and a new ** may also occur.
1. At around 2:30 p.m., open the "60 Shenzhen-Shanghai A Rise Ranking" of the Kanban software.
2. Find a rise between 3% and 5% (the specific increase range can be adjusted according to the market, and it can be appropriately increased when it is good, and it can be adjusted down when it is bad).
3. The selection ratio is more than 1, and the turnover rate is between 5% and 10% (the size of the plate can be adjusted according to individual circumstances, and the small plate can allow a smaller turnover rate, because the small plate often fluctuates greatly).
6. Finally, choose one or two from the selected ** to operate, and formulate corresponding trading strategies according to personal risk tolerance and profit goals.
The tail end stock selection method is suitable for those investors who like to carry out ** operations, because the end of the market is often accompanied by large fluctuations and has higher short-term opportunities to make money. However, it should be noted that the tail stock selection method is only a screening method, which cannot guarantee that the selected ** will be profitable, and it still needs to rely on personal analysis and operational ability to trade.