In the renovation process, hollowing wall tiles is a common problem. When the wall tiles are hollow, it will not only affect the aesthetics, but also may affect the safety and service life of the wall. In order to solve this problem, the method of perforation and glue injection can be adopted. Below we will introduce in detail the punching and glue injection method of wall tile hollowing.
1. Preparations.
Before you start punching and dispensing, you need to make the following preparations:
1.Determine the position of the hollow drum: Use a small hammer to gently tap the wall tile to determine the position and extent of the hollow drum.
2.Clean the hollow drum area: Use a blade or scraper to clean the hollow drum area of debris and dust.
3.Prepare the dispensing tools: Buy special dispensing tools, such as syringes, glue guns, etc.
4.Choose the right glue: Choose the right glue according to the material of the wall tiles and the hollowing situation, such as tile glue, glass glue, etc.
Second, the perforation and glue injection steps.
1.Punching: Use an electric drill or hand drill to make a small hole with a diameter of about 2cm on each side of the hollow drum area.
2.Clean the holes: Use a brush to clean the dust and debris inside the holes.
3.Inject glue: Inject the selected glue into the hole, being careful not to inject too much to avoid overflow.
4.Insert the glue stick: Use a special tool to insert the glue stick into the hole so that it fits snugly against the tile.
5.Fix the stick: Use a special tool to secure the stick inside the hole to make sure it doesn't come loose.
6.Wait for curing: According to the curing time of the glue, wait for a certain amount of time for the glue to cure completely.
7.Clean up the site: Use a damp cloth or wet wipes to clean up the construction site to make sure it's clean and tidy.
3. Precautions.
1.In the process of punching and gluing, it is necessary to pay attention to safety and avoid injury.
2.Choose the right glue to avoid damage to the tiles.
3.When fixing the glue stick, make sure it doesn't come loose so that it doesn't affect the effect.
4.While waiting for the glue to cure, do not touch or move the glue stick to avoid affecting the effect.
5.When cleaning the construction site, be careful not to damage the tiles in other parts.
With the above steps, we can easily solve the problem of hollow wall tiles. In the decoration process, if you encounter similar problems, you can try to use the method of punching and glue injection to deal with it. At the same time, when choosing ceramic tiles and construction materials, we should also pay attention to the choice of first-class products to reduce the occurrence of similar problems.