The 2 cm gap in the roof of the wardrobe is not only aesthetically pleasing, but can also accumulate dust and even risk items falling in. Here's a detailed guide to how to deal with it:
1. Materials and tools
Edge banding or wooden strips.
A ruler or tape measure.
Saw. Sandpaper.
Screwdriver. Screws or nails.
Woodworking glue. Spray paint or wood paint.
Decorative strips filler.
2. Measurement and material selection
Measure the size of the gap: Use a ruler to accurately measure the width of the gap and the length of the top of the wardrobe.
Material selection: Choose edge banding or wood strips according to the material of the wardrobe. Wooden strips are better suited for large gaps, while edge banding strips are suitable for smaller gaps.
3. Cutting and trimming
Cut the sticks: Based on the measurement results, the strips are cut to the appropriate length with a saw.
Trim the edges: Use sandpaper to sand the edges of the strips, making sure to ** thorns.
Fourth, install edge banding strips or wooden strips
Fit: Put the wooden strip or edge banding strip into the gap to make sure the size is appropriate.
Fixed: Use woodworking glue to paste and fix the wooden strips or edge banding strips in the gaps. For longer strips, further fixation with screws or nails may be required.
5. Surface treatment
Grinding: Make sure that the wood or edge banding strip is fixed and then sand the surface again.
Varnished: Choose a spray paint or wood paint similar to the color of the wardrobe to paint the wood strips so that they are in harmony with the wardrobe as a whole.
6. Decoration and details
Decorative strips: Decorative strips can be installed on both sides of the wooden strips to enhance the aesthetics.
Fill in the gaps: For areas where there are still small gaps, fill them with an appropriate filler.
7. Completion and maintenance
Check: After installation, check that it is firm and neat in appearance.
Maintenance: Regularly inspect for looseness or detachment, and repair if necessary.
8. Precautions
When selecting materials, their temperature and moisture resistance characteristics should be considered to adapt to different environments.
When using saws or other tools, you should pay attention to safety and wear appropriate protective gear.
During installation, make sure that the room is well ventilated to prevent excessive glue or paint smell.
Summary:
The 2 cm gap at the top of the wardrobe can be effectively treated with careful selection of the right material and careful workflow. These steps can enhance the appearance of your wardrobe and prevent dust accumulation, ensuring that your furniture is clean and durable.