Citrate rotary flash dryer XSG-16
The crystal particle size is 40-200 mesh, accounting for 85%.
Bulk density 07-0.9g/cm3
Feed moisture 45%.
Drying final moisture 8%.
After drying, the yield is 35t/h
Drying evaporation 25t/h
When the temperature of the material is dry, it is 70 (we are now drying with boiling, and the temperature of the exhaust air is between 55-65, and the material is dry).
DetailedFineAdvisoryinquiryJointDepartmentsquareformulaGuFirstRaw!DryCalcination
The heat source provides 06MPa saturated steam.
Rotary flash dryer, including stand, motor, steam chamber, drying cylinder, filter cylinder, upper filter screen and lower filter screen, described drying cylinder is fixed on support, described drying cylinder below is provided with motor, described motor is connected to drying inner cavity by rotating shaft, described rotating shaft is provided with feeding blade in drying inner cavity, described feeding blade is provided with rotating blade on rotating shaft above, described support top is provided with steam chamber, described hot steam enters into steam pipe from steam inlet, and enters into steam cavity under the effect of fan, described rotating blade left side is provided with feeding conveying chamber, described material needs to be dried enters into feeding conveying chamber from feed port, rotating blade can break up the material that enters and prevents material from agglomeration, and feeding blade transports the material that falls down from the bottom to the topIn order to facilitate the hot steam to bring the material into the filter cylinder, the sensor selects the switch of the upper outlet through the value of the psychrometer, which has a simple structure and low cost, and improves the drying efficiency.