How to convert 4 20mA to 0 10V

Mondo Technology Updated on 2024-01-19

The easiest way to convert 4-20mA to 0-10V is to use an external resistor. Since there is a need for a conversion between the current signal and the voltage signal, the required resistance value can be calculated by Ohm's law. According to Ohm's law, the relationship between the resistance r and the current i and the voltage v is V=IR. Therefore, in order to convert a current signal of 4-20mA into a voltage signal of 0-10V, it can be achieved by selecting the appropriate resistance value.

The specific calculation method is as follows:

First, determine the required voltage range, i.e., the 0-10V range. Suppose the current that needs to be converted is in the range of 4-20mA.

Then, according to the relation of Ohm's law, v=ir, 4mA is substituted into the calculation, and v=0004a*r, set the result to 0v.

Next, substituting 20mA into the calculation yields v=002a*r, set the result to 10V.

Based on the two equations obtained from the above calculations, the value of r can be solved.

By solving this system of equations, the value of r can be derived, and thus the desired resistance value can be determined. Please note that in order to keep the resistance value stable and accurate, it is recommended to choose a resistance with an accuracy of 1%.

In practical applications, it can be further adjusted and optimized according to specific needs and circuit design, such as using components such as amplifiers and operational amplifiers to achieve more accurate conversion effects. At the same time, it is also necessary to pay attention to the stability of the power supply voltage and the matching of the power supply range to ensure the normal operation of the conversion circuit.

Circuits

Related Pages