What to look out for when using a 500 wood shredder
1. When using crusher equipment, if there is an abnormal situation in the wood crusher equipment, it is necessary to stop the machine for inspection in time, find the problem in time and solve it properly. If it drags on any longer, I am afraid that small problems will become big problems, and the gains outweigh the losses.
2. Before starting, all fasteners must be carefully checked to ensure that there is no loosening.
3. If there is abnormal noise, discharging blockage, overheating of the bearing or motor during the work, the feeding should be stopped, the machine should be stopped for inspection, and the fault should be eliminated. If the ammeter reading increases sharply, the feeding should be reduced or stopped, and then gradually added after recovery. After the pulverizer is finished, it should be idled for 2 to 3 minutes. Only after the material in the standby is clear, the crusher and fan can be stopped. In short, safety production must be strictly ensured in the production process. The cotter pins on the pin should be checked frequently. If there is excessive wear or cracking, peeling, it should be replaced immediately.
Proper use process of wood crusher:
Inspection: 1. Check whether the nut of the wood crusher is loose. If it is found to be loose, it should be tightened immediately;
2. Check whether there is a lack of butter;
Start: 1. Start the main engine first, the main motor is running normally, and then start the fan;
2. Start feeding;
3. When the machine is stopped, the material in the cavity should be extracted before the shutdown
Precautions: 1. It is strictly forbidden to put hands or iron tools into the crushing chamber;
2. Turn off the power immediately if there is an abnormality
3. Add butter before each start-up
4. It is strictly forbidden to smoke when working, and pay attention to fire prevention.
Wood shredders are also known as sawdust machines, sawdust machines. It can crush all kinds of hardwood, waste wood, wood chips, branches, wood, bark, bamboo, compressed boards, building shell boards, waste bamboo fences, etc. , construction waste wood, as well as hard plastics, large and small paper tubes, logs, etc., are processed into wood chips at one time!It has a good crushing effect on poplar, bamboo, thatch, corn stalk, sorghum pole, corn cob, pine, miscellaneous wood, waste wood, miscellaneous wood, raw bamboo, medicinal straw, etc., and is suitable for individual industrial and commercial households and light industry factories. Ideal processing equipment for bacteria. Compared with the previous woodchip machine, it has the characteristics of stable performance, high output, safe and simple operation, powerful function, durability and high degree of automation. It is a special wood processing equipment for the production of wood flour (sawdust) and edible fungus raw materials. It occupies a small area and has a reasonable and compact structure, which is very suitable for mobile operations.
Wood crusher, sawdust crusher, wood chip crusher structure:
They are mainly composed of a chipping device, a crushing device and a fan (generally large models of wood shredders are equipped with fans and dust collectors);
1. The chipping device has an organism (divided into upper body, middle body, rotor, cutter head;
2. The crushing device has a crushing chamber and a crushing knife (there are 7 type knives, 1 type knives and centrifugal knives);
3. The fan is composed of a fan, a powder collector and a dust collector.