Luer Cone Joint Tester (including positive and negative pressure ISO) product introduction.
1. Product Overview.
The Luer Cone Joint Tester (including positive and negative pressure ISO) is an instrument used to detect and verify Luer cone joints. It complies with ISO standards and can be tested for positive and negative pressures to ensure that the fitting will work properly under a wide range of pressure conditions. The tester is suitable for medicine, medical devices, chemicals, biotechnology and other fields, and is an important tool to ensure product quality and safety.
Second, product features.
1.Conform to ISO standards: This tester is designed and manufactured in accordance with ISO standards, and can carry out positive and negative pressure tests to ensure the accuracy and reliability of test results.
2.High-precision pressure control system: The high-precision pressure control system can achieve stable and accurate pressure control to meet various testing needs.
3.Large-capacity sample bin: Equipped with a large-capacity sample bin, it can accommodate multiple Luer cone joints to be tested at the same time to improve testing efficiency.
4.Automated testing: This tester adopts automated testing technology, which can quickly complete various test items and reduce manual operation errors.
5.Intelligent data analysis: Equipped with an intelligent data analysis system, it can automatically analyze test data and generate test reports, which is convenient for users to evaluate product performance.
6.Safety protection design: In order to ensure the safety of operation, this tester adopts multiple safety protection design, such as overload protection, emergency stop switch, etc.
3. How to use.
1.Preparation: Install the Luer cone fitting to be tested in the sample chamber and make sure that the connector is securely installed.
2.Pressure adjustment: According to the test requirements, adjust the pressure value of the pressure control system and carry out positive and negative pressure tests.
3.Start test: Press the start button and the tester will automatically complete each test item.
4.Data processing: After the test is completed, the tester will automatically analyze the data and generate a test report. The report can be printed or saved as needed.
5.Cleaning and maintenance: Regularly clean and maintain the tester to ensure its normal operation and prolong its service life.
4. Precautions.
1.Before use, you should read the product manual carefully to understand the operation method and precautions of the tester.
2.During use, the tester should be kept clean and dry to avoid the influence of moisture and dirt on the test results.
3.When conducting a stress test, it should be ensured that the pressure value is within the specified range to avoid overloading or damaging the equipment.
4.When performing the test, it should be ensured that the Luer cone fitting to be tested is installed securely to avoid the impact of falling off or loosening on the test results.
5.In the process of use, if abnormal conditions or faults are found, the machine should be stopped for inspection in time, and professionals should be contacted for maintenance.