Under normal circumstances, there are four stages of intelligent special design: schematic design, initial design, construction drawing design, and deepening designThe depth of design varies from stage to stage at each stage, and generally varies depending on the stage of the project's development.
Schematic design
Schematic design is an important stage in the design, which generally includes system architecture, functions and technical requirementsDesigners should start from the analysis of needs, through the analysis of the actual project function, management mode, and the owner's financial situation, and choose a reasonable, economical, and advanced intelligent solution. It is necessary to meet the needs of scheme approval or approval and preparation of design documents.
1) Design documents: project overview, design basis, design content;
Project Overview: The main indicators of the building, such as building type, function, area, etc., reflect the building;
Design basis: information provided by the construction unit, national regulations, standards and atlas;
Design content: system architecture, functions and technical requirements;Overall planning situation.
2) Provide the main computer room requirements and system configuration table corresponding to the functional format of the building.
3) System cost estimation: estimated by system size or unit area (empirical value).
Design development
Initial design is the further refinement of the schematic design, which generally includes design descriptions, design drawings, system budget estimates, etc.;It is required that the preliminary design documents should be expressed completely, the implementation of the feasibility of the intelligent system scheme, and the needs of the preliminary design approval and the preparation of construction drawing design documents should be met to ensure the design quality.
1) Design specification: engineering overview, design basis, design content, design scope and division of labor interface, design residual problems;
2) Design drawings: catalog, system diagram, computer room layout diagram, point plan.
3) Cost estimate: determine the budget estimate of each system, including unit, quantity, and system cost.
Construction drawing design
Construction drawings are the bridge of design and construction technology, which needs to be based on the preliminary design documents, in-depth understanding of equipment, materials and construction technology, etc., to meet the specific requirements of engineering construction on the drawings. Meet the needs of being able to prepare construction drawings and budgets and conduct businessTo meet the requirements for project acceptance, etc.
A complete set of intelligent special design documents includes:
1) Drawing cover, table of contents;
2) Design description, legend description;
3) System diagram and schematic diagram of each subsystem;
4) General plan, each system plan;
5) Detailed drawings of the computer room and layout of the weak current room
6) Equipment installation details and large sample drawings
7) Calculations;
8) Point table;9) Table of main equipment materials.
Deepening the design
The deepening design is the further deepening of the construction drawing design of the construction unit, which is mainly implemented on the drawings according to the technical indicators of equipment and materials in the bid-winning documents. Meet the procurement of equipment materials and the production requirements of non-standard equipment;Meet construction requirements and precautions.
1) Detailed drawings of the computer room and weak current room;
2) Equipment installation details, non-standard product production drawings;
3) Equipment number and identification.
Design outcome document
Building your own knowledge system is not a simple click, favorite, copy and paste;It is about continuous learning, continuous repetition, innovation in repetition, and self-worth in innovation!