If you are in the industry, you are generally clear about the construction and processing operation of the exterior wall warehouse joint, but for ordinary people, you generally know less about it, and the relevant content is introduced below.
Analysis of the construction and processing operation of the exterior wall sub-warehouse joint and the explanation of related knowledge.
Introduction: Exterior wall silo joint is a device commonly used to protect the floor, and its construction treatment operation is very important to ensure the stability and life of the floor. This article will deeply analyze the construction processing operation of exterior wall sub-silo joints, and explain its related knowledge in detail, aiming to help readers fully understand and master the technology to improve the quality and efficiency of construction.
First, the steps of the construction and processing operation of the exterior wall sub-warehouse joint.
1. Preparation:
Before starting construction, it is necessary to prepare the construction site. This includes cleaning up the work area, ensuring the ground is level, removing debris and standing water, and preparing the required equipment and materials.
2.Positioning & Reticling:
According to the design requirements, determine the position and length of the sub-silo joint, use the measuring tool for precise positioning, and use the marking tool for marking, so that the construction process can be carried out accurately and without errors.
3.Cut or dig:
Depending on the marking, use the appropriate tools to cut or dig to create space for the split seams. Choosing the right tools and materials reduces noise and vibration and ensures the effectiveness and quality of the application.
4.Cleaning and trimming:
After cutting or digging, the remaining debris and debris need to be cleaned up. Then use a plastering tool to trim to ensure the flatness and aesthetics of the sub-bin joint.
5.Installation of protective materials:
After cleaning and trimming, protective materials need to be installed to protect the floor from the outside environment. Commonly used protective materials include waterproof coatings, anti-crack adhesives, etc. According to the actual needs, select the appropriate protective materials for construction.
6.Perfect the details:
After the construction of the protective material is completed, the details need to be treated, such as the seams of the sub-silo joints, to ensure that there is no risk of water penetration and water leakage. At the same time, it is necessary to inspect and clean up the marks and dirt that may be left during the construction process.
2. Explanation of the relevant knowledge of the exterior wall sub-warehouse joint.
1. The role of the silo seam:
The purpose of the exterior wall is to divide the floor and prevent the cracking and damage of the floor caused by factors such as foundation settlement and temperature changes. Through the setting of the sub-bin joint, each part of the floor can be relatively independent, reduce mutual influence, and improve the stability and durability of the overall floor.
2.Types of sewing in separate compartments:
According to the different design requirements and construction sites, the sub-silo joints can be divided into straight and curved types. Linear separating seams are suitable for places with regular geometric shapes, while curved separating seams are suitable for places with irregular shapes.
3.Selection of protective materials:
According to the characteristics of the floor and the environment, the selection of appropriate protective materials is the key to ensure the construction effect of the floor sub-chamber joint. Waterproof coating can effectively prevent water penetration and moisture invasion, and anti-crack adhesive can improve the seismic performance and crack resistance of the floor.
4.The importance of detailing:
Detail processing is the key to ensure the construction quality of the sub-silo joint. Perfecting the joints of the sub-chamber joints prevents water infiltration and the risk of water leakage, and extends the life of the floor.
Conclusion: The construction and treatment operation of exterior wall sub-silo joint is an important step to protect the floor, which can effectively reduce the cracking and damage of the floor, and improve the stability and durability of the floor. By understanding the construction operation steps and related knowledge, you can effectively improve the quality and efficiency of construction, and ensure the reliability and life of the floor.