How to release the auto hold function: When you need to release the brake state (such as starting), you only need to tap the accelerator to release the brake, and the system will automatically turn off the brake when the driver starts. The details are as follows:
1. Introduction to Auto Hold.
Auto Hold, called automatic parking function in Chinese. When the driver encounters a red light or needs to stop temporarily while driving, he only needs to press the brake pedal, and the Auto Hold function will automatically activate to lock the wheels and prevent the vehicle from rolling. When it's time to drive again, simply tap the accelerator pedal and the auto hold function will be automatically disengaged, and the vehicle can continue driving.
2. How to cancel the auto hold.
Tap the accelerator pedal: When the Auto Hold function is activated, simply tap the accelerator pedal and the function will automatically dismiss. At this point, the vehicle regains momentum and continues to drive.
Press the Auto Hold switch: If the driver wants to manually disable the Auto Hold function, they can press the Auto Hold switch. In this case, the function is immediately deactivated and the vehicle can be driven again.
Press the brake pedal: In some cases, the driver can press the brake pedal if the auto hold function does not automatically disengage. At this point, the function is forcibly deactivated and the vehicle can be driven again. However, it should be noted that this method may cause some damage to the vehicle's braking system, so it is recommended to avoid it as much as possible.
Restart the engine: If none of the above methods can disable the auto hold function, the driver can try restarting the engine. In this case, the function is automatically deactivated and the vehicle can be driven again. However, it is important to note that this method may cause some of the vehicle's system settings to be reset, so it is recommended to use it only when necessary.
3. Handling of special circumstances of auto hold.
In some special cases, the Auto Hold function may not work properly. For example, when the vehicle is parked on a slope, the function may not be activated or activated due to gravity. At this point, the driver needs to use other methods to keep the vehicle stable. In addition, in some extreme cases (such as low battery level or system failure, etc.), the auto hold function may also fail. At this time, the driver needs to take corresponding measures according to the actual situation to ensure driving safety.
4. Precautions for auto hold.
When using the Auto Hold function, the driver needs to be vigilant and observe the surrounding traffic conditions at all times to ensure driving safety.
When activating or deactivating the auto hold function, the driver needs to gently press the accelerator pedal or press the relevant switch to avoid unnecessary damage to the vehicle.
When parking for long periods of time or encountering traffic jams, it is recommended to turn off the auto hold function to save energy and reduce wear and tear on the brake system.
If you find that the Auto Hold function does not work properly or there is a fault prompt message, please contact professional maintenance personnel for maintenance and maintenance in time.