The main products of Primax fluorescent sensitization screen:1Developer 2Dental membrane development kit 3Fluorescent Sensitivity Enhancement Screen Primax Fluorescence Enhancement Screen Product Model: PET GBX-2 Primax B 200 Y 400 Primax G400
Primax Fluorescent Sensitivity Enhancement Screen Product Features: Primax Fluorescent Sensitivity Enhancement Screen Low Particle Level;High-definition images;Disappear small persistence;No non-luminescent impurities. The material is a layer of light-emitting light with a high-strength "filamentous" surface and allows good contact between the screen and the latex layer of the X-ray film. In addition to this, the Primax screen contains antistatic additives that significantly reduce the amount of discharge from the radiography. Primax G 400 - Green launch enhanced screen with a speed of 400. The screen has a high strength, the screen resolution reaches 7,0 pairs of lines mm. Primax Fluorescent Sensitive Screen Product Application: Primax Fluorescent Sensitive Screen Medical Film Radiography Technology for Enhancing Screen at the Transmitting EndApplication: Optimized for 90-second machine processing and manual processing of film Features: Connecting the emulsion photosensitive film to the two sides supported by the PET, the total density value of the veil has good contrast, and the details are obviousMedical X-ray film with green emission enhancement screen Application: Suitable for 90 seconds machine and manual processing of film Performance: Double-sided coated film in PET It provides a high-speed and low-total fog contrast on the basis.
Primax fluorescence sensitivity screen gradient average: 229 (+-15%) Same as DIN 6867, Part 1 Decolorization without light: Application of a red unsafe display with a light intensity of 57 mL (DIN 6868, Part 2), KODAK GBX-2 or other similar products: System standard of 90-34 °C, at least 90 seconds for development, fixation, rinsing and excretion, or following DuPont recommendations. 5 min of continuous development, 20 °C manual (fixative requires simultaneous use of a stationary bath). The process should be adjusted when applying the recombination of endurance temperatures. In the case of manual work, contrast, sensitivity and large density should be taken into account, which are different for the machine. Primax Fluorescent Sensitivity Screen Presentation and Format: Both centimeter film and capsules can be stored in a box containing 100 pieces of film, and 5 boxes of 100 pieces of film can be stored in a single carton. Storage: Untreated film is placed in a storage bin below 25 degrees Celsius Primax Fluorescent Sensitive Screen Processing: Standard 90 second processing system, at 34 °C, 90 seconds less developing, fixing, washing, drying or manual processing at 20 °C for 5 minutes development according to the manufacturer's recommendations (hardener needs to be added to a stationary bath). If a different temperature and time combination process is used, it must be used. In the case of manual machining, it should be taken into account that the contrast, speed and high density are different from the machining drawings given in this article.