First, the characteristics of the rectangular groove mold sink mold
Rectangular groove mold is a high-strength, wear-resistant, corrosion-resistant plastic mold, which has the advantages of accurate size, smooth surface and long service life. Its unique rectangular design allows it to make rectangular flow tanks with specific sizes and shapes to meet the drainage needs in various construction and landscaping projects.
Second, the application field of rectangular groove mold.
Construction engineering: rectangular groove mold is widely used in the construction of drainage ditches, rainwater pipes, sewage treatment pools and other facilities in construction projects. Its advantage is that it can quickly and accurately make a rectangular flow tank that meets the needs of the project, and improve the construction efficiency.
Landscape engineering: In garden engineering, rectangular groove molds can be used to make drainage systems for flower beds, lawns, roads and other facilities. Its unique rectangular design blends in with its surroundings while maintaining drainage.
Third, the use of rectangular groove mold.
Preparation: Before using the rectangular groove mold, check whether the mold is intact and confirm that it is not broken or deformed. At the same time, make sure that the required materials (e.g. cement, sand, stones, etc.) are prepared.
Installation mold: According to the needs of the project, select a suitable location to install the rectangular groove mold. The ground is required to be flat and stable for subsequent operations.
Filling materials: Cement, sand, gravel and other materials are mixed according to a certain proportion, and then filled into a rectangular groove mold. Care should be taken to ensure the compactness of the filling material to avoid bubbles or cavities.
Curing and disassembly: After the filling is completed, the rectangular groove mold is cured to ensure that the cement and other materials are fully solidified. After the curing time reaches the requirements, the mold can be disassembled. Pay attention to handle with care during the disassembly process to avoid damaging the mold.
Later maintenance: For the used rectangular groove mold, it is necessary to clean and maintain. The surface of the mold can be rinsed with water, dried and stored properly for the next use.