The precautions for the use of electric actuator screw lift are as follows:
1.Before use, check and confirm that the product is not damaged during transportation, and the attached accessories are complete. Special attention should be paid to the inspection of the appearance of the motor and the screw tightening conditionThe adjustment bolts of each part should have sufficient preload to prevent loosening in the work and reducing the efficiency or abnormal wear and tear or even causing damage. Moving parts should be handled with care when used to prevent parts from being damaged and bumped. Paying attention to the hygienic conditions of the work environment is particularly important to ensure proper operation and improve the service life (e.g. fluorocarbons on dust can corrode metal surfaces). In addition, when the ambient temperature is lower than 5, more lubrication points should be added (2-4 drops of No. 30 oil) to avoid burning the motor due to excessive starting currentAt the same time, attention should be paid to whether the protective device is strictly forbidden to overload operation, otherwise it will shorten the life of the reducer and easily cause the occurrence of fission deformation and other phenomena of the box) In addition, do not dismantle the electrical protection measures and accessories at will).The installation site should also consider its good ventilation performance in order to dissipate heat and cool down. Please do not disassemble or replace parts without permission. (If there is any fault, you can contact the maintenance personnel to deal with it) to maintain regularly to ensure that the machine is in good working condition to avoid unexpected situations that affect the normal use and use of the effect.
The above content is for reference only, and you may also need to adjust and optimize according to the actual situation. It is recommended that you read the manual to learn more details, information on the use of methods and operation steps, etc., and you can also consult the after-sales service to obtain guidance and service requirements to help you solve related problems and get better improvement and development needs