Individual applicants for the safety officer need to register online, but the specific registration ** each region is different, you can get the registration through the notice of the Department of Housing and Urban-Rural Development, and you can participate in the safety officer exam after successful registration. Prepare the registration materials for the safety officer: 1 copy of the ID card, both front and back need to be copied;1 copy of academic certificate, the copy should clearly show the academic number and other important information: 2 1-inch color ID photos;Fill in the registration form, and pay attention to the correct and complete information to avoid affecting the test.
The safety officer certificate is still very easy to test, if it is a person engaged in the industry, there is no difficulty in the test, if it is a cross-industry examination, there are some difficulties, but the overall content of the exam is not difficult, and the exam questions are all in the textbook (safety technology, safety regulations, safety organization).
Safety officer certificate as the construction industry "basic" certificate, the difficulty of the examination is not high, statistics of the provinces pass rate, the average is more than 80%, as a whole belongs to the relatively high school candidates as long as they prepare for the exam seriously, look at the book or can pass the test, some are just the certificate. Target. Although the pass rate of the exam is high, after all, the exam itself is uncertain, and whether it is difficult or not varies from person to person, and candidates should still be well prepared.
2023 Safety Officer Exam Questions and Answers (For more real questions and mock questions, please refer to [Safety Officer Exam Manual] Come on***.)
Question 1: When a mobile operating platform is in use, the brakes of the walking wheels or guide wheels should be (). Civil Engineering (General Questions)].
a.The two diagonal hold brakes.
b.As long as it is stable, one brake is sufficient.
c.All should be kept braking.
d.More than half of the brakes.
Correct answer: c
Reference analysis: from JGJ80-2016 No. 62.Article 3: The bearing capacity of the mobile walking wheel should not be less than 5kN, and the braking torque should not be less than 25n·m, the mobile operating platform frame should be kept vertical, not bent and deformed, and the brake should be kept in a braking state except in the case of movement.
Question 2: When pouring concrete structural components with a height of more than 2 m, () should be set
a.Plastic mold shells.
b.Escalator. c.Horse pedaling.
d.Scaffolding or operating platforms.
Correct answer: d
Question 3: When the distribution box. When the switch box is made of cold-rolled steel plate, the thickness of the steel plate should be () mm, and the surface of the box should be treated with anti-corrosion.
a.1.2-2.0
b.0.8-1.5
c.1.0-1.8
d.2.0-2.1
Correct Answer: a
Question 4: The model of the main overhead beam of the cantilevered operating platform shall not be less than () channel steel. [Civil Engineering (Required)].
a.14#b.16#
c.18#d.20#
Correct answer: c
Reference analysis: Housing Municipal Engineering Safety Production Standardization Guidance Atlas (Ministry of Housing and Urban-Rural Development 2019 Edition) 22.7.3
Question 5: Ventilation should be done after the construction storm (homophone) of the tunnel construction of the mining method is broken, and the ventilation time should not be less than () min. Civil Engineering (General Questions)].
a.10b.15
c.20d.30
Correct answer: B
Reference analysis: according to the "Municipal Engineering Construction Safety Inspection Standards" (CJJ T275) 71.2 articles.