With the cost effective dual network port R5 5625U small host to improve productivity, BMF s500 has

Mondo Technology Updated on 2024-01-31

With the configuration and cost performance of mini hosts getting higher and higher, many players who like to toss digital products have begun to start, and the gameplay has been developed in an endless stream, among which the technical requirements for tinkering with all in one are not high, and the community resources and tutorials are relatively rich, and they do not involve much advanced **, which has become the reason why many players and even novices start.

And for me, who have the need to edit and mount games, it is a very good choice to add a secondary host, so that when I edit**, use the side route to open the scientific Internet to find materials, and then share files through NAS at any time to transfer the files to my main machine at high speed through the intranet, and the main machine is responsible for doing high-load work such as animation rendering, so I don't have to worry about the computer crashing and losing my files.

The plan is perfect, so what kind of machine should you choose?Now there is a more suitable N305 machine, the power consumption and heating are excellent, and the CPU performance also meets the demand, the only drawback is that the **chip** is more expensive, and the barebones version is basically around 1500 yuan. I was unwilling to research on the Internet for a long time, and finally found a good alternative - this Morefine BMF S500+.

Why do I think this Morefine BMF S500+ suits me well?The first is the R5 5625U processor, which is an upgraded version of the 5600U, which increases the acceleration frequency of a single core to 43GHz, the main frequency is still 23GHz, 7nm process, 6 cores and 12 threads, ZN3 architecture, in addition to increasing the bandwidth of PCIe lanes, compared with N305, the same TDP power consumption, better chip process, both CPU and GPU performance are ahead, and most importantly, it is cheaper!

The core graphics card is AMD Radeon RX Vega 7, the GPU comprehensive ability is comparable to MX350, and it supports a variety of **format decoding encoding, if you can successfully pass through the graphics card, **Black Synology** will be smoother, and it can also reduce the load on the CPU.

I haven't used AMD's processor before, but I still need to verify the performance release of this morefine Mofang S500+, install win11 to test the baking situation, and do not open other software separately for doughnuts+AIDA64 double baking test, the CPU power consumption reached 36W during the baking process, the temperature rose to 84, and the power consumption was also about 34W, which can be said to be really good.

I tried 3D Mark's Time Spy stress test again, and I ran 3 cycles and 20 times in turn, and the pass rate was above 97%, which preliminarily proved that the thermal design and stability of the MoreFine BMF S500+ were qualified.

The test software alone is certainly not accurate, and it is still necessary to look at the heat dissipation of the machine during operation and the power consumption of the actual test.

I chose GTA5 and Dota 2 as my test targets:

GTA5 looks good at the default quality, but the aliasing is more noticeable, the frame rate can reach 57 and even 1080p in some scenes.

Dota 2 is less stressful, and the game runs at a frame rate of 52 at the same default quality, and the frame rate can be maintained when the full-screen effects of large-scale team battles are maintained.

Now that we've learned about CPU performance, what about the rest of the hardware of this Morefine BMF S500+?From the outside to the inside, the interface of the machine is mainly in the front and rear, the sides are all mesh holes for auxiliary heat dissipation, the bottom is the four foot pads that raise the machine to provide heat dissipation space, and there are also heat dissipation openings in the middle.

After looking at the appearance, let's talk about the interface of the Morefine BMF S500+, the front is relatively simple, two USB32 Interface A Type-C interface, as well as a power button, this interface allocation is quite reasonable, and it is also a solution that many mini hosts will use, among which Type-C is a full-featured interface, and the practicality ratio will be much better.

The interface at the back is more dense, the power interface is a DC interface, and the power supply gives a 120W large power supply, but it is not a brick power supply like a notebook, and the volume and weight are similar to those of the mobile phone charging head, which reduces the burden when carrying.

*The output interface is quite conscientious, one HDMI interface + one DP interface, counting the previous Type-C interface, it is a three-screen display.

The MoreFine BMF S500+ is a dual Ethernet configuration, one of which is still 2.5G network port, so it is completely OK to build a soft router, and it is also a good choice to pass through a network port to serve as a secondary router for the soft routing system.

The Morefine BMF S500+ is also good in terms of scalability, two M2 NVMe SATA dual-protocol hard drive connector, plus an additional 2The 5-inch hard disk interface, as well as the two DDR4 memory interfaces, are reasonably positioned, except for the memory, there is no overlap in the position of accessories, which avoids the hardware heat dissipation difference, frequency reduction or even failure caused by stacking different hardware on top of each other.

Overall, the design of Morefine BMF S500+**, all hardware configurations are enough to use, it is a good choice for office and entertainment, its configuration meets the needs of my ALO, although many people do not trust AMD processors very much, but in my use of a few days, there is no sign of overturning, I also successfully installed ESXi virtual machine system on this Morefine BMF S500+, I believe that it can be achieved by continuing to explore for a few days alo!

Back to the question at the beginning, in today's rich mini host market, I believe that many users like to tinker with various machines into ALO machines, or play something different, and see that many forums are active with everyone's figure, isn't this the fun of tossing?And I also opened a new pit today, but I believe that I am not the only one who has implemented ALO with this Morefine BMF S500+ or other similar configuration machines, so I still hope that everyone will communicate with each other and make progress together!

Digital Goodies Awards

Related Pages