With the increasing prosperity of the automobile market, cars are playing an increasingly important role in our lives. However, there are various problems that can arise during the use of a car, and one of the most annoying is burning engine oil. This problem is especially prevalent for owners of the Volkswagen Tiguan. Today, I would like to share my experience and methods of repairing engine oil with more riders through my personal experience, hoping to help you solve this problem.
I chose the Volkswagen Tiguan not only because of its handling, but also because of its comfort and safety, but over time, I found that my Tiguan oil consumption was higher than normal. At first, I didn't pay much attention to this problem, I thought it was a carbon deposit problem when I checked on the Internet, and a lot of additives didn't seem to have changed much. This made me very worried, worried that if it was not addressed in time, it would cause serious damage to the engine or even scrap.
After discovering the problem of burning engine oil, I first consulted with the Volkswagen 4S store for a solution, and the 4S store suggested that I replace the oil and oil filter, and check the engine seals and valves and replace the exhaust valve, and at the same time, I did a visual cleaning of the combustion chamber, but after this series of operations, the problem was not completely solved, the vehicle was still running more than 2,000 kilometers of oil alarm, and I was told that I could only overhaul it after consulting again... So, I started searching the Internet for the causes of burning engine oil and how to solve them.
After searching the Internet and reading materials, I learned that burning engine oil can be due to a variety of reasons such as aging engine seals, damaged valve seals, and worn piston rings. In order to determine the specific problem, I chose a workshop to do a detailed inspection of the engine. After ruling out the wastegate problem, by measuring the cylinder pressure and observing the wear of the cylinder wall, we found that the piston ring seizure was the real cause of the oil burning. The repair shop came up with two possible solutions: replace the piston rings or try to buy additives from online to improve the problem.
After finding the cause of the problem, I began to check the information to compare the pros and cons of various methods, and finally decided to use the piston ring releaser of the PnF technology to try after various considerations. First of all, the purchase of products, according to the recommendations to purchase 2 oil piston ring releaser and 12 fuel piston ring releaser, at the same time to participate in the event, the follow-up will also send 6 fuel piston ring releaser, simply put, it is a combination of 2 + 12 + 6.
After all, the release of the piston ring requires the piston to run up and down to ensure that the engine is repaired under normal working conditions, and the final thing is to see the repair effect.
At the time of writing this post, I have completed the repair, and after the maintenance of 7500 kilometers, the current oil level is normal, it should be completely repaired successfully, and I will follow the product guidance and suggestions to regularly clean the oil circuit to prevent the ring from burning the oil againAnd through this successful experience of burning engine oil repair, I have deeply realized the following points:
The importance of car maintenance: As car owners, we should regularly maintain and maintain the car to ensure the normal operation of the engine and driving safety.
The importance of solving problems: "There is a precedence in hearing the Tao, and there is a specialization in the industry" If there is a problem, we must find the key point, and find the right solution, and solve the problem fundamentally to avoid hidden dangers.
The importance of accumulating experience: I have accumulated a lot of experience and related professional technical knowledge during this restoration process, which can not only help me better maintain my own car, but also help me better help and solve other people's car problems.
Finally, to sum up, the successful experience of burning engine oil repair made me deeply aware of the importance of car maintenance, and I will pay more attention to car maintenance in the future, after all, maintenance can really avoid a lot of trouble.