When the car is used as a consumable in daily use, many people know that carbon deposits will be generated, so when the carbon deposits accumulate seriously in the car, it will definitely cause a series of carbon deposit failures.
Therefore, many people will find some ways to clean up the carbon deposits in the car when they maintain the car daily, because only by cleaning up the carbon deposits regularly can a series of faults caused by carbon deposits be effectively solved.
For example, your old car is properly maintained after driving for several years, and there are no bad driving Xi, and the car still has a decrease in power and an increase in fuel consumption, then it must be caused by carbon deposits, so everyone pays more attention to cleaning up carbon deposits.
Friends may ask how to avoid carbon deposits
And the answer isCarbon deposits are inevitableIt is impossible to avoid the generation of carbon deposits whether it is long-term low-speed operation or long-term high-speed operation;And how to remove carbon deposits is also a headache for car owners.
In fact, it is not difficult to remove carbon deposits, so let's approach "carbon deposits" together.
Carbon deposits are produced by every car, but there are more and lessThere are long and short time periods.
The common parts of automobiles that generate carbon deposits are mainly concentratedThrottle valves, intake tracts, intake valves, fuel injectors, piston tops.
Carbon deposits in intake components such as throttle valves, intake tracts, and intake valves.
It is produced by mixing some gasoline vapor and engine oil vapor with some impurities in the airThe presence of carbon deposits in these areas will affect the efficiency of the air intake.
In addition to the impurities in the air, the carbon deposits on the top of the piston are also sintered together with olefins, paraffin, and gums in the gasoline, and some of them will be discharged out of the car with the exhaust gas, and a small part will remain in the cylinder, and the more and more carbon deposits will be formed.
1.The human factor
If you idle for a long time, the fuel will not meet the requirements, resulting in knocking. Long-term low-speed driving, the throttle is in a small open state. If the vehicle is not serviced on time, the engine will be in poor working condition for a long time.
2.Environmental factors
Long-term driving in a dusty environment causes the air filter to be blocked, the mixture is too thick, and the fuel in the cylinder is not combustedThe air humidity is very high, especially in the south, where there is a lot of rain. The air filter is easily clogged by moisture, and the engine air intake is not smooth, resulting in incomplete combustion of the mixture and carbon deposit.
3.Mechanical causes: Poor engine operation
The valve is not closed tightly, and the gap between the piston ring and the cylinder head is too large, resulting in the cylinder denting and incomplete fuel combustionThe spark plug works poorly, and the injector atomizes poorly into droplets, resulting in incomplete combustion;Circuits such as ignition coils work poorly;Throttle hairpins. and so on, which will lead to incomplete combustion and carbon deposits. Early ignition, especially late ignition, can lead to incomplete combustion and carbon deposits.
1.Increased fuel consumption
First of all, the most obvious is the increase in fuel consumption.
Carbon deposits, it is oneGel substance,has a strongAdsorption,To a certain extent, it will suck off some of the fuel injected into the cylinder, and at the same time, it will also increase the piston and some mechanical parts inside the crankshaftResistance.
In addition, the fuel that is sucked out in this part will also form new carbon deposits in a state of incomplete combustion, and so onVicious circle,will be more and moreFuel efficient.
2.Difficult to start cold
In fact, when the car is difficult to start, it is likely to be caused by two aspects, the first aspect is caused by the battery power loss, when the battery is out of power or the power supply is insufficient, it is easy to cause the car to start the difficulty;The second aspect is caused by excessive carbon deposition, which will adsorb gasoline during cold start, resulting in the amount of gasoline entering the cylinder not meeting the normal working needs, resulting in the phenomenon that it cannot be started or is difficult to start.
The exhaust gas is strong and the smell is pungent.
When you find that the smell of your car's exhaust is different from the past, you should be vigilant. In the case of insufficient engine fuel, the carbon deposits of the substances produced, in addition to adhering to the various parts, over time, the three-way catalytic converter will have various problems, and the exhaust gas will be very strong and pungent.
If it is in a blocked state for a long time, it will make the ternary fail, and disassembly and cleaning will damage the life of the car. Therefore, the maintenance of the car is not only the appearance, but also the inside should be cleaned with a leave-in detergent to clean the accumulated carbon deposits, which is conducive to prolonging the life of the ternary.
If these above performances occur, it indicates that the carbon deposit of the car is more serious, and the owner is reminded to clean up the carbon deposit in time.
1. Cause premature ignition
Carbon deposition adheres to the surface of various parts that make up the combustion chamber (especially the piston ring, the upper part of the cylinder, the valve head, and the injector hole), which reduces the volume of the combustion chamber and increases the compression ratio, which not only deteriorates the working performance of the engine, but also becomes a hot spot for many hot spots, which is easy to induce premature combustion in the combustion chamber.
2. Affect heat dissipation
A thick layer of carbon deposits on the surface of the combustion chamber will inevitably affect the heat dissipation and easily cause the engine to overheat.
3. Increase wear and tear
The hardness of carbon deposits is very high, and if the detached carbon deposits enter the friction pairs, it will produce abrasive wear and aggravate the damage of the parts.
4. Destroy lubrication
Carbon deposits can contaminate the lubricating oil and even clog the lubricating oil passages, resulting in deterioration of lubricating performance.
5. Hinder disassembly and assembly
Carbon deposits that accumulate in the grooves of the piston rings will make it difficult to install the piston rings, or cause seizure and breakageCarbon build-up on the bolts and between the bolts of the cylinder head can make the cylinder head difficult to remove.
Many people only pay attention to the engine for carbon deposition, in fact, in the car, it is also very important to clean up carbon deposition with a hole, and this small hole isThree-way catalytic converter.
There are a lot of people who have such doubtsWhy does carbon deposition affect three-way catalytic converters?
Because there is too much carbon accumulation inside the engine, part of it will be discharged by the three-way catalytic converter, but the carbon deposit that has just formed is very viscous, and when it passes through the three-way catalytic converter, it will be dischargedIt's not 100% passed, which meansOn the filter hole of the three-way catalytic converter, carbon deposits will be directly adsorbed.
If the three-way catalytic converter is seriously blocked by carbon deposits, then the car will have fuel consumption**, exhaust gas exceedance, unstable idling, slow speed, and even if the situation is serious, it may directly damage the three-way catalytic converter, resulting in the three-way catalytic converter being scrapped in advance.
So no matter whether the car is expensive or not, insist on cleaning it once a monthNot only can it improve the performance of the vehicle's engine, but it can also reduce the frequent alarms of the oxygen sensor in the exhaust system.
Boom throttle to remove carbon deposits, this method should be familiar to everyone, many drivers should know, and there should be many drivers who have experimented with such a method.
Most drivers do so when they are in the middle of the road. So have you ever experimented with the method of slamming the throttle in neutral?
The throttle is carried out in the state of the car stopping, when the neutral gear is hung, the engine does not really produce power, and the air intake volume of the intake cylinder will not change, and it cannot achieve the effect of cleaning up carbon deposits at all.
What are the consequences of improper throttle operation?
If onlyInadvertently stepped on the accelerator by mistake, resulting in a short period of "hanging the empty gear and bombing the accelerator".In this way, the damage to the car is not very large, and the owner does not have to worry too much.
But if it isIf you hang the neutral gear and bomb the throttle for a long time, the damage to the car is very fatal, and it will even lead to the spontaneous combustion of the car and the scrapping.
Because the long-term neutral gear and slamming the throttle will cause insufficient gasoline combustion, insufficient gasoline combustion will form new carbon deposits, adhere to all corners of the engine, and block the three-way catalytic converter, resulting in the temperature of the three-way catalytic converter is too high, once the temperature is too high for a long timeIt is easy to cause spontaneous combustion of the line, and eventually the combustion spreads to the whole car, resulting in the scrapping of the car
And once the carbon deposits are too much, it will beIt leads to engine idle shake and engine power attenuation, which reduces acceleration performance and increases fuel consumption.
In addition,If a part of the gasoline that is not fully burned ignites outside the cylinder, it will also cause the vehicle to spontaneously combust, resulting in the destruction of the vehicle and the death of people, so the harm of slamming the throttle in place is far more serious than imagined.
I went to consult a maintenance worker who has worked in a car dealership for more than ten years, and he taught me a little trick for spending less: that isUse the special carbon deposition cleaner for the car dealership, and the carbon deposition runs out after use.
In particular, the professional carbon deposition cleaner of the non-dismantling type to clean up the carbon deposits in the car is not only effective, but also does not leave potential safety hazards because there is no need to disassemble the parts.
It can also be cleaned up after the carbon deposit, so that the carbon deposit fault can be solved, this method is now recommended by many maintenance workers to remove carbon deposit, if you don't know how to maintain the car, today this little trick must be learned.
If your car also needs to clean up the carbon deposit, you can use the following products that the old drivers are using, the carbon removal effect is good, and the safety performance is also very high, it is worth recommending, and the used ones are praised!
With a brand history of 14 years, Goodway has already witnessed the rise of the domestic automobile industry and the automobile cleaning and maintenance industry.
The unique "Goodway LP+" carbon removal formula uses PIBA+PEA in a ratio of 5:3, through ultra-high temperature fusion, and then through critical point cooling, so that the product can achieve accurate carbon removal in the zone.
It can not only achieve deep cleaning of the high-temperature area in the cylinder, so that it can be fully burned and restore power, but also can dissolve the carbon deposits in the low-temperature area such as oil circuit and fuel injector, so as to achieve the effect of smooth oil circuit, energy saving and emission reduction, and maintain the normal, fuel-efficient and efficient work of the automobile engine.
In addition to carbon removal, you must not choose the wrong fuel treasure, otherwise the effect will backfire!
Goodway Carbon Master LP+ contains 7 high-performance functional formulasSelected polyisobutenemine, high-efficiency friction reducer, rust inhibitor, demulsifier, lubricant, preservative, accelerant, bacteriolytic, which can effectively improve the combustion efficiency of the engine and improve fuel economy instantaneously.
According to the national petroleum and petrochemical quality inspection report, the carbon removal rate of the first bottle of Goodway Carbon is as high as 952%, easy to achieve carbon deposition and fuel consumption.
We added an old car that had not been cleaned for many yearsintoAfter carbon removal, it can be seen that before and after cleaning, the carbon deposits in the spark plug and other parts are significantly reduced, the gear is smooth, and the attached gum is significantly reduced.
Before vs After Use.
Before vs After Use.
Before vs After Use.
The use of Goodway Carbon Bomb is also very simple, first open the fuel tank cap, tear off the aluminum film seal, add a bottle of Carbon Bomb to the fuel tank and then fill up the gasoline, you can achieve full carbon deposition effect, and at the same time can improve the oil quality and clean the fuel system.
A bottle of Carbon Bomber can keep the fuel system clean and smooth at all times, so that the engine can continue to glow with strong kinetic energy.
In addition to cleaning up carbon deposits, the Carbon Bomb GT can also be effectively mitigatedIdle shaking, weak acceleration, cylinder knocking, soaring fuel consumption, excessive exhaust gas, and blocked oil circuitQuestion, a bottle of carbon master has six effects, and it is necessary to raise a car at home.
Now during the event,If your car is underpowered and has high fuel consumption, you can try Goodway Carbon Master, the effect is really good!