The test was carried out in Shaoxing, ZhejiangCamping tent inspection, camping tent final inspection, actualCamping tent inspectionThe number of shipments was 690 pieces. This list was sampled according to the International Sampling Standards Table (AQL) with a sample number of 32 and an AQL of 25 4.0。
1.Special checkpoints.
2.Appearance and craftsmanship.
3.Quantity compliance.
4.Product and packaging compliance.
5.Data measurement and field testing.
Camping tent inspection
There are no special requirements for this customer.
In accordance with AQL (Acceptable Mass Limit) 25，4.0 inspection, the number of samples is 32, the maximum allowable value: 2 for critical defects, 3 for minor defects. The inspection of the outdoor camping tent actually found 6 serious defects, 5 minor defects, and found that the defects were untrimmed threads, poor sewing, and dirty surfaces.
The number of products in the camping tent inspection order is 690, the number of shipments is 690, and the actual quantity completed: 690 packaged, 0 unpackaged; Boxes: 115 packed, 0 unpacked.
Check the relevant data according to the inspection information of the camping tent provided by the customer: technical documents, labels, box marks, and product specifications.
Product packaging inspection.
01.Box drop test.
Referring to the ISTA 1A standard, after 10 box drops, the packaging or camping tent inspection product must not have fatal or serious defects.
02.Product Dimensions Weight measurement.
According to specifications or reference requirements. Adopt +-3% as tolerance if possible, no special instructions.
Product size check.
03.Barcode scanning inspection.
The barcode of the camping tent inspection can be scanned and the scan result is correct.
04.Special feature checks (for which all are installed to check).
Camping tent inspection must have all the nominal functions, such as installation adjustment, switching, setting, display, actual use, etc.
05.Coating testing.
Spray paint, stamp, coat and print all camping tents with a 3m 600 (or similar adhesive tape) for testing. After the test, no more than 10% of the area can be shed.
Coated tape inspection.
06.Assembly testing.
Assemble according to the manual, check whether the parts are complete, whether the assembly steps are correct, and whether the finished product is in good condition.
07 Waterproof inspection.
Spray water on the waterproof side for 2 hours, during and after the test, and the other side must not be wet or not penetrated.
After the inspection of the above inspection items, it was concluded that the inspection test conclusion of the camping tent was not conforming, and the water leakage test of one tent failed.
Camping tent inspection conclusion: non-compliant.
Camping tent inspectionThe inspection conclusion is not conformed, and the final inspection is the most effective way to confirm the quality level of the entire batch of goods. It usually requires 100% of the goods to be produced and at least 80% of the goods to be packed into cartons. The appearance and process of this single product - camping tent inspection exceed AQL, therefore, the inspection conclusion of camping tent is that it does not meet the requirements and fails.