To avoid that we are in the process of setting up the program.
The device begins to detect the loss.
So I recommend.
Before setting up the program.
First of all, click on this poster
That's the pause button.
Leave the device from performing detection work.
Then we start the setup of the program for the entire device.
If you want to set up a program.
Let's start by clicking on m
Then when we can see the first column.
It's the basic procedure.
In the basic procedure.
We enter by selecting OK.
And then after entering.
That's how we choose to do it.
Yes, there can be. Time interval runs.
Or the water quality and quantity are operated at intervals.
The place needs to be according to the age needs.
Set it up yourself.
That's what I'm going to talk about now.
One of our reagents is set up.
First of all. This analysis interval can also be set at a set time.
It can be based on self-needs.
Then we set the capacity.
The design capacity means that.
We're 500 ml or 100 ml now.
Then we can see.
By default, it is already set to 500 ml.
After it is selected.
It is followed by an asterisk to indicate that it is selected.
If I think this is okay with the time.
I can press the M key to exit.
Go back to the previous column.
After the reagent volume is set.
Let's make a setup now.
It's the model of the century.
Then if the reagent model is set.
If something goes wrong.
It will also cause this screen to be displayed.
It's not normal, then we're in the aftermath.
Since our default on this device is to say.
The first signal was TH 2005
Its reagent range is um 089-8.93
If you choose TH 2005.
You can just select this.
We can see that.
Tail it has an asterisk.
An asterisk indicates that this world type is selected.
Okay, so what about the last one.
We need to understand the unit of measurement.
Units of measurement. We can see that this is the German hardness.
If I make an adjustment to it now.
When it becomes ppm.
Then I chose OK.
We can see that.
An asterisk appeared on its tail.
The asterisk stands for saying that we are confirming the choice.
Then I clicked m to exit.
So that means the volume of the reagent is 500 ml.
Types of reagents in 2005
Then the reagent is in ppm
In this case, it will all be displayed on the screen.
We recommend clicking M to exit.
We can see that.
Now it's this ppm display unit.
Then I type this reagent and the volume of the reagent.
It has already been selected.
Then let's first if it's new reality.
I need to pick in the actual amount of it.
Then again, we are going to click on m
In the basic program we designed it is:
Type of design.
The volume of the design.
And then there's the language, and the unit, and whatever.
If we now want to change the amount of his reagent.
That is, at the moment.
What percentage of this whole bottle is our reagent?
Then we need to click on the service.
After the service went in.
They have a reagent margin.
There's a reagent margin here.
We can see that at the moment I'm designing for 93%.
Although we this.
I'm currently at about 50%.
Since I factory reset my device.
It is 93% factory set
Then I choose this one.
Then I'm not just the m key to exit.
This means that the design margin of my current equipment is also 93%.
This completes one of the devices.
Setting the amount of reagent.
There is also a unit.
The effects of reagent bottle replacement.