When using the hexagonal block slope protection mold, it should be gently picked up and put down gently to avoid damage to the mold as much as possible. Extreme care is also taken during the demoulding process, as molds are susceptible to damage. Therefore, it is necessary to wait until the raw material inside the mold has solidified and molded before demolding. Be sure to rinse the hexagonal block mold after demoulding to prevent residue from damaging the mold. After cleaning, the mold should be placed in a shaded place to dry to avoid direct sunlight.
The hexagonal block slope protection mold is basically used in large quantities. At present, there is a very big difference between slope protection molds made of raw materials or secondary materials. Therefore, if you need to buy a hexagonal block mold, you should not rely only on the best for comparison. Instead, a comprehensive comparison should be made, considering the number of times the mold is used, weight and other aspects. **It only reflects the commercial value of the mold, but does not reflect its practical application value. Therefore, no matter what type of mold it is, it should not be evaluated and selected based on ** alone, as this often leads to blind decision-making.