After using the socket for a long time, it often happens that the plug will fall out as soon as you let go, as if it cannot be plugged in at all. In this case, how should we fix it?
When we let go of the hand, there will be a gap between the plugs, and with a slight shake it will fall off. Actually, it's very simple to solve this problem, so let's take a look.
Because most people don't have a screwdriver or the right tools at home, all we need is a pair of scissors and it will be perfectly repaired.
When many friends encounter this situation, their first reaction is to break the plug like this, but it is easy to disconnect it directly, resulting in damage, do not rush to break the plug, because the root cause is not the plug damage, but the problem of the socket.
We use scissors to snap the screws on the scissors, use the edge of the scissors as a screwdriver, and loosen it. Just like this, we can remove the socket and loosen every screw. No special tools are required, just a pair of scissors can be done. After removing the socket, we will be able to see what is going on inside.
These two openings are too large, and it is easy to produce metal fatigue over time. So, it doesn't plug in at all, it's the same problem. With a slight twist, it almost breaks, but it can't be fastened here.
The next steps are simpler, still using the scissors tool, we don't need any special tools, we break it to the left a bit, and now it's tighter.
Then break the two pieces of copper to the right because they have metal fatigue. Let's break it a little bit like this, and we twist this one to the left and side at the same time, like this.
Now, let's find a plug and try it to see if it can be plugged in tightly, and you can see that it is plugged in very tightly. We pushed both of these copper pieces out, and now the plug is very, very tight, and we're just going to reinstall it. It's very simple, you don't need to move anything else, you just need to adjust the tightness of the copper sheet slightly.
According to the old rule, use a pair of scissors, turn it slightly tighter, and tighten the screws. We have four screws, all of which operate the same way, and after adjustment, are very firm.
Then, let's take a look at the side of the plug, when you plug it in, there is no gap, and no matter how you shake it, it won't come loose.
The socket is loose, it can be easily solved with just a pair of scissors, nothing else is needed, very practical methods and tricks, have you learned?100 help plan