Particle size measurement and concentration determination equipment Aerosol particle size spectromet

Mondo Health Updated on 2024-01-30

The Promo 3000 aerosol particle size spectrometer is a light-scattering aerosol particle size spectrometer system for particle size analysis and concentration determination, which can be equipped with different Welas sensors as required, easily connected via fiber optic cables and interchangeable as required. These sensors reliably measure concentrations from <1 cubic centimeter to 106 cubic centimeters and can be used in gases as well as liquids.

Promo 3000 Aerosol Particle Size Spectrometer Measurement Technology

The Promo 3000 is equipped with a new fast 20 MHz signal processing processor that analyzes the interference of each particle. This makes it possible to identify coincidental events based on the scattered light signal, i.e. multiple particles in a measurement volume can be identified and corrected from a single signal at a time. This makes it possible to raise the maximum concentration limit to 106 particles per cubic centimeter (Welas 2070 sensor). Similarly, with a concentration of less than 1 particle per cubic centimeter, the use of the welas 2500 sensor also results in higher measurement accuracy.

Promo 3000 Aerosol Particle Size SpectrometerUp to four measuring ranges:

0.2µm–10µm

0.3µm–17µm

0.6µm–40µm

2 m 100 m (additional sensors 2300 and 2500).

The Promo 3000 aerosol particle size spectrometer is known for having up to 128 size channels per measurement range, with concentrations ranging from <1 particle cubic centimeter to 106 particle cubic centimeter.

The touchscreen display ensures user-friendly operation. Measurements can be easily started and all data such as current digital distribution and digital concentration can be estimated and displayed.

The Promo 3000 aerosol particle size spectrometer is used as a stand-alone measuring device (i.e. without an external computer) and can be measured continuously. All incoming data can be stored at a maximum time resolution of 1s. As a result, Promo can independently measure and store weeks of data. For data transfer, PROMO can also be integrated into the corporate network.

The Promo 3000 aerosol particle size spectrometer has a standard interface and can be controlled via a process control system or a simple LabVIEW program. As a result, the Promo 3000 aerosol spectrometer is particularly suitable for control and monitoring applications.

On the Promo 3000 aerosol particle size spectrometer system, two welas sensors provide a light source and the scattered light pulses are detected by means of a photomultiplier tube. This allows quasi-concurrent particle measurements to be made at two sampling locations no more than 100 meters apart.

With the Promo 3000, users can effectively have two scattered light spectrometers in one device, which have the same device characteristics in the following aspects:

Granular resolution capability.

Granularity classification accuracy.

Counting efficiency. Zero count rate.

All Welas 2000 series sensors can be used with the Promo 3000 aerosol particle size spectrometer system. Particle size and particle quantification offer particular advantages for the characterization of fluctuating raw gas concentration separators.

Optomechanical switches

With the optomechanical switch, the two connected sensors can be easily controlled. The sensors are automatically controlled by software.

Special advantages of selector switches:

Change measurement positions faster.

The sampling line is sediment-free.

Long service life;There is no wear of the seals due to dust particles.

Promo 3000 Aerosol Particle Size SpectrometerPros:

Up to 128 size channels per measuring range.

Concentrations range from 1 granule cubic centimeter to 106 granules cubic centimeter.

Calibration curves for different refractive indices.

From 02 m starts with a high and reproducible counting efficiency.

Fiber optic technology. The large touch screen is easy to operate.

Customers can calibrate, clean, and replace bulbs independently.

External control via RS 232 or Ethernet.

Comes with PDANALYZE analysis software.

Optional: The software PDContin is available as a working software for Welas Digital.

Low maintenance. Reliable functionality.

Reduce your operating expenses.

Related Pages