According to Dessò engineers, the BNC joints are usually held together with the cable by bolts and nuts. These bolts and nuts can be made of metal, plastic, or synthetic materials, depending on the application and user needs.
Gaskets and O-rings can increase the sealing performance of the BNC joint and prevent moisture, dust, etc. from entering the joint.
The insulating sleeve can protect the metal part of the BNC joint from galvanic corrosion and improve the insulation performance of the joint at the same time.
Fasteners include screws, nuts, bolts, etc., which are used to secure the BNC joint to the equipment.
The adapter can extend or change the cable interface of the BNC connector to suit the connection needs of different devices.
BNC connectors are often used in test instruments such as oscilloscopes, signal generators, etc. These instruments are usually equipped with a BNC interface for signal input and output.
An attenuator is a device used to reduce signal strength and is commonly used in test systems. The attenuator can be connected to the test instrument via a BNC connector.
An equalizer is a device used to adjust the frequency characteristics of a signal and is often used in television systems. The equalizer can be connected to the TV receiver via the BNC connector.
A cable is a cable used to connect a BNC connector with other devices or components. The type and length of the cable depends on the application.
The converter can convert the signal from the BNC connector to other types of data formats, such as USB, HDMI, etc. This allows the BNC connector to interoperate with other types of devices.
For some BNC devices that require additional power supply, such as some high-power transmitters or receivers, a power adapter is required to provide them with the required power.
Calibration instruments are used to ensure that the electrical performance of the BNC connector meets the standards, such as voltage, current, frequency, etc. These instruments can be connected to the DUT via a BNC connector.
Repair tools include a variety of tools for disassembling, cleaning, and repairing BNC joints, such as screwdrivers, wrenches, detergents, etc.
To protect against accidental electric shock or dust ingress, some BNC connectors are equipped with a protective cover or cover. These hoods or caps can effectively protect the safety and hygiene of the joints.