Hello everyone, I am Liuba Daren, the last issue briefly introduced to you the first step of morel mushroom planting, today I will briefly talk about the following steps:
First of all, after the strain is placed, it is flooded with water, filled for 2 to 3 hours, covered with a black film, heated and fermented, and left for fermentation for about a week, 3 small rows of each ridge can be put into the nutrient bag when you see the fermentation white fungus net.
Nutrition bags. Place the nutrition bag in accordance with the spacing of 20 to 30 cm as appropriate, put too close to waste the nutrition bag, too far away if the effect is not good, each nutrition bag with a knife 3 cuts, scratched side to the ground for living, can not be put backwards.
Adjust the spacing of the bags.
After putting the nutrition bag again, cover the black film for thermal insulation and fermentation, and then insert the bamboo strips, the spacing of the bamboo strips is generally 15 to 20 cm wide, and then cover a layer of white film after insertion, and the white film is intermittently pressed with soil on both sides to avoid the wind blowing the film away, and the white film is mainly anti-freezing in winter.
Bamboo strips. After covering the white film, finally cover with a shade net to prevent snow in winter. If it snows heavily, you don't need to build a greenhouse, so as not to crush the greenhouse with heavy snow, and then cover the greenhouse when the snow stops in the next year, and you can build the greenhouse at one time at the bottom of the altitude, because it is not easy to snow at the bottom of the altitude, even if there is snow, there is no heavy snow, and it will not be affected.
Cover with white film.