DHX3L(A) Mine Intrinsically Safe Model Signal Light.
Overview. The DHX3L(A) Mine Intrinsically Safe Signal Light is a safety signal light designed for mine workers. The signal light complies with the national standard GB 38361-2010 Sexual Environments Part 1: General Requirements for Equipment and GB 38362-2010 "** Sexual Environment Part 2: Equipment Protected by Flameproof Enclosure "D"" has the requirements of mine intrinsically safe explosion-proof level, which can be used in flammable and explosive environments in coal mines.
Peculiarity. DHX3L(A) Mine Intrinsically Safe Model Signal Light has the following features:
1.Intrinsically safe design: The intrinsically safe circuit design is adopted, which will not produce electric sparks or high temperature under normal operation or fault conditions, and will not ignite flammable gases to ensure the safety of the mine.
2.High brightness: The use of high-efficiency LED light source, high brightness, strong penetration, even in the dim environment of the mine can be clearly seen.
3.Waterproof and dustproof: The shell of the lamp is made of high-quality materials, which has good waterproof and dustproof performance, and can adapt to the harsh environment under the mine.
4.Reliable battery: Equipped with 2 No. 7 batteries, the battery life is long and easy to replace.
5.Multiple protection: It has multiple safety protection functions such as overcharge protection, over-discharge protection, and short-circuit protection to ensure the safety of use.
6.Easy to carry: The lamp body is small, lightweight, easy to carry, and suitable for all kinds of mobile devices.
Scope of application. DHX3L(A) Mine Intrinsically Safe Signal Light is suitable for all kinds of places that require safety signal indication in coal mines, such as mine interior, excavation face, substation, etc. It can help miners quickly send signals in an emergency, avoid accidents, and ensure personal safety.
How to use: When using the DHX3L(A) Mine Intrinsically Safe Model Signal Light, follow these steps:
1.Check that the signal lights are in good condition and replace them in time if they are damaged.
2.Place the signal light where it needs to be used, and make sure the light fixture is stable and not shaky.
3.Turn on the switch of the signal light and the signal light will start working.
4.When you need to turn off the signal lights, turn off the switch to make sure the lights are completely powered off.
5.When it is time to replace the battery, open the lamp housing, remove the old battery, install the new battery and close the lamp housing.