There are two kinds of measurement of RH-1T thermohygrometer, one is the reader measurement, and the other is the automatic measurement.
Reader measurements
For the VW-102E full-function reader for measurement, insert the quick plug of the measuring line into the socket on the left side of the reader, and connect the various color clips of the measuring line to the output cable of the thermohygrometer, the temperature and humidity meter cable definition: red (+) and black (-) core wire are the voltage input terminal, the voltage input value is 12V, white (A) and green (B) are the signal output terminals, and the voltage output value is 2V.
The thermohygrometer contains the number, calibration coefficient k, temperature correction coefficient b and other information of the thermohygrometer.
The measurement of the reader will automatically measure the identification information of the measured value, store it in the reader, and synchronize it with the Gannan cloud platform to facilitate rapid statistical calculation and query, so that the measurement work can be operated remotely and intelligently and paperlessly, and the front measurement and rear can be viewed and tabbed in real time.
Automated measurements
MCU-32 distributed modular automatic measurement unit for automatic measurement can be connected to 8 32 temperature and humidity meters, and 1 16 temperature and humidity meters can be connected to GDA16 (1 4 8 16) full-function acquisition instrument, which is suitable for single or multiple networks to automatically measure the sensor signals of vibration wire, differential resistance, resistance, current, voltage, switch, and digital output, and any combination of access channels, with intelligent identification and reading of sensor identity parameters, intelligent fault diagnosis, real-time collection, timing collection, measurement data storage, Automatic sleep, waterproof, lightning protection, anti-electromagnetic interference and other capabilities.