The following introduction to the armor joint material of the emery floor is quite good, and by reading the following article, you will be able to have a deeper understanding of this.
Emery floor armor joint material is a kind of joint filling material commonly used in floor construction, which has the advantages of high hardness, strong compressive resistance and good wear resistance. The following will make an in-depth analysis of the corundum floor armor joint material, and introduce its construction steps and technical points in detail.
Construction steps: 1. Ground preparation: clean up the ground debris and repair the damaged part to ensure that the ground is smooth and clean.
2.Gap treatment: Select the appropriate corundum floor armor joint material according to the actual gap width, and pour it into the gap.
3.Trowel and pave filling: Use a trowel to smooth the armor seam material so that it is flush with the ground to ensure that the filling is uniform and stable.
4.Curing and curing: Curing and curing according to the requirements of the corundum floor armor joint material, which generally takes a few days to a few weeks.
Technical points: 1. Choose the right corundum floor armor joint material: select the appropriate corundum floor armor joint material according to different floor requirements, including color, hardness, compressive performance, etc.
2.Gap treatment: Before filling the corundum floor armor joint material, it is necessary to clean the gap and repair the damaged part reasonably to ensure that the filling material can be tightly bonded to the ground.
3.Trowel and paving: When filling the armor joint material of the corundum floor, it should be smoothed with a trowel to make it flush with the ground to ensure that the filling is uniform and stable, and to avoid ups and downs.
4.Curing and curing: After the construction is completed, according to the requirements of the corundum floor armor joint material, the curing and curing will be carried out to ensure that the caulking material can be fully cured to achieve the best use effect.
The construction steps of corundum floor armor joint material mainly include ground preparation, gap treatment, plastering and curing. In the construction process, it is necessary to pay attention to the selection of appropriate materials, reasonable treatment of gaps, smoothing and paving, and curing and solidification to ensure that the corundum floor armor joint material can achieve the best use effect.