The construction process steps of the parking lot epoxy floor paint can be divided into the following stages:
First, the preparatory stage.
1.Design scheme: According to the use requirements, budget and aesthetic needs of the parking lot, formulate a suitable epoxy floor paint design scheme.
2.Purchase materials: Choose high-quality epoxy floor paint materials, including epoxy resins, pigments, fillers, additives, etc.
3.Tool preparation: Prepare the tools required for construction, such as rollers, brushes, trowels, sandpaper, etc.
Second, the grassroots treatment stage.
1.Clean the base layer: remove dust, oil stains, loose particles, etc. on the surface of the base layer to ensure that the base layer is clean and tidy.
2.Measure the flatness: Use a spirit level to measure the flatness of the surface of the base layer and repair the unevenness.
3.Curing the base layer: For the newly poured concrete base layer, it needs to be cured for at least 28 days to ensure that its strength meets the requirements.
4.Coating interface agent: apply a layer of interface agent to enhance the adhesion between the base layer and the epoxy floor paint.
Third, the construction stage.
1.Epoxy primer: After the epoxy primer is stirred evenly, it is applied to the surface of the base layer, and the coating should be uniform and no omissions when brushing.
2.Laying conductive sand: After the primer is dry, the conductive sand is evenly laid to improve the conductivity of the ground.
3.Epoxy primer: Mix the epoxy primer with an appropriate amount of quartz sand and brush it on the surface of the primer to form a flat and dense layer of a certain thickness.
4.Sanding the middle coat: After the middle coat is dry, use sandpaper to polish the surface to remove the uneven parts and improve the surface smoothness.
5.Epoxy topcoat: After the epoxy topcoat material is stirred evenly, it is brushed on the sanded surface of the middle coat to ensure that the coating is uniform.
6.Polishing topcoat: After the topcoat is dry, use a polishing machine to polish the ground to improve the brightness of the surface.
Fourth, the maintenance stage.
1.Closed maintenance: After the epoxy floor paint is painted, closed maintenance is carried out to avoid personnel and vehicles entering and exiting, and to ensure that the floor paint is fully cured.
2.Regular inspection: During the curing period, regularly check the dryness and curing of the floor paint coating to ensure the quality of construction.
Fifth, put into use.
1.Ground acceptance: After the floor paint construction is completed, the ground acceptance is carried out to ensure that the floor paint coating achieves the expected effect.
2.Put into use: After passing the acceptance, it can be put into use. The newly constructed epoxy floor paint needs to pay attention to prevent sharp objects from scratching, heavy object impact, etc., so as not to affect the service life of the floor paint.
In short, the construction process of epoxy floor paint for parking lots includes five stages: preliminary preparation, base treatment, construction, maintenance and putting into use. In the construction process, it is necessary to strictly follow the construction process and select high-quality materials to ensure the quality and service life of the epoxy floor paint in the parking lot. At the same time, it is necessary to pay attention to environmental protection requirements, and choose solvent-free and pollution-free epoxy floor paint to ensure the cleanliness and safety of the parking lot environment.