Now the decoration waterproof work is generally carried out by masons, and they have not learned specifically for professional waterproof training, so some points and precautions can not be very clear. In fact, many waterproof coatings are made of two materials, and only according to a certain proportion can the best waterproof coating be made. This also explains the problem of leakage after renovation. There is a set of standardized procedural requirements for waterproof construction, so how to construct waterproofing in the bathroom?
1. First of all, it is necessary to carry out the treatment of the base layer, and the cleaning of the floating dust must be completed carefully, and the cement agglomeration and loose base layer must also be removedSpecial treatment should be carried out for holes, holes, corners and surfaces, and the yin and yang corners should be wiped into an arc shape (or V-shaped).
2. The deployment of waterproof coating is generally explained on the waterproof material, as long as it is deployed according to the above proportion. Of course, it is necessary to understand in advance how to mix waterproof coatings and what the proportion of waterproof coatings is to be blended. If it is not proportional, it is difficult for the waterproof coating to achieve the desired effect.
3. Understand the painting method of the paint, and paint the waterproof paint from bottom to top, first on the wall and then on the ground. The best interval between the first and second coats is about 4-8 hours. If you want to grasp a degree, you can test the waterproof layer that has been brushed by hand and feel that it is not sticky, then you can carry out the painting work again. And the two paintings before and after are crossed.
4. Key waterproof parts of the bathroom.
Floor drains, small water pipes and floor joints, as well as toilet pipes and other parts, these places are the key parts of waterproofing, and are often the most prone to water leakage in the bathroom. When constructing, you need to focus on these parts, these parts need to be brushed several times more than other parts, for example, other parts need to be brushed twice, here you need to brush three times or more;In addition, there is also a lot of leakage under the doorstone. During construction, first make a strip under the door stone, and the waterproofing must be rolled to the top of the strip, so as to form a basin shape and form the function of water storage and water retention.
Generally, manufacturers of radiators should also have an understanding of decoration and decoration, mainly in order to make the radiators produced better integrate with the decoration style and improve the fit between the radiator and the decoration style. I can't say how to be proficient in decoration knowledge, but I still have some basic knowledge. The above content is purely a personal point of view, if you agree with my point of view, you can like and pay attention, for the decoration and radiator problems, I hope you can leave your valuable comments in the comment area, help us to correct, so that the decoration knowledge can help more people. Radiators