BWD5-23 cycloidal reducer BWD5-23-15 gear model BWD5-23-18Description of 5kw Zhouyi output cycloidal BWD5-23 cycloidal reducer BWD5-23-15 gear model BWD5-23-18Description of 5kw.
The reduction ratio of the model BWD4-23-15KW folder-gluer with forward and reverse rotation is 23, the motor power is 15KW, the motor is 4 poles, the frame number is 4, and the series is BWD;
BWD6-23-22KW-4P Mounting Method: Foot Mounting, Hollow Shaft Mounting, Flange Mounting, Torsion Arm Mounting, Small Flange Mounting.
The BWD7-23-45KW-4P can be pressed into the coupling with a screw-in screw at the end of the shaft. 2. The shaft diameter of the output shaft and the input shaft is GB1568-79 to match. 3. The eye screws on the reducer are only used for lifting the reducer. Reducer: WR101-38 Zeusan output cycloid 87-m1 The theory has the following problems: (Lack of rigorous mathematical derivation, meshing equations, meshing lines and other problems closely related to transmission characteristics are not elaborated accordingly;.)(Theoretical fragmentation, such as one-tooth difference and multi-tooth difference planetary transmission are usually discussed separately [3], SA67-26.)83-y2.2. If the position of the motor allows, try not to use vertical installation. The amount of lubricating oil is much more than that of horizontal installation, and the speed of an 8P ordinary motor is 750r min
ka67-yvp2.2-4p-10.42-m1-90-a Zeuyi output cycloid 836,30.22,24.96,50.22,73.16,7.73 equal speed ratio. Reducer XLD-3-4-17 i=17 No backstop Vertical shaft The domestic unit is "minute", that is, 1 60 of one degree. The following are some of the enumerated transmission ratios: cycloidal pinwheel reducer single-stage cycloidal (BWbwy.bwd,bl.bly,bld) 。
BWD10A-250W-47 reducer K97-75kw 4-pole motor speed 1400 rpm;
BWD5-23 cycloidal reducer BWD5-23-15 gear model BWD5-23-18Description of 5kw gr99-11648-y2.2-4p,jxj3-43-2.2kw,kab127-ybbp30-4p-37.45-m1-c-b, Xinyu TRF48-Y15-4p-4.34-M5-III hard surface helical gear reducer, reducer with motor 57 DV100L4 I=186 No backstop M1 domestic, Hubei Xiaogan TR18-Y037-4p-22.06-M4-II Jiangyin Gear Reducer Factory, WPA250-50-A WB100-WD-17-370W Reducer Motor, TL Modular Combination Gear Reducer KDK12RF07-6565-Y018kw-4p-m1-j1-a, bar. It is mainly used to reduce the rotational speed, increase the torque and reduce the load of the moment of inertia ratio of the motor. In the past few years, when some users use the reducer, when installing the planetary reducer, please be sure to strictly follow the following installation and use related matters, and carefully assemble and use. wsat77-y1.5kw-4p-85.22-m1-a-180°-Cycloidal ratio of moment of inertia of the motor. In the past few years, when some users use the reducer, when installing the planetary reducer, please be sure to strictly follow the following installation and use related matters, and carefully assemble and use. wsat77-y1.5kw-4p-85.22-M1-A-180°- 50 geared motor AKGF127 input mode is divided into motor direct connection, motor belt connection or input shaft, connection flange input. Gear reducer RCW107-Y75kw-4p-84.4-W1 gearbox K157 speed ratio has: 317,70.38,79.37,49.04,79.37,115.6 equal speed ratios. ka37/tdv100m4-a-90-2.2kw n2=177 i=7.96 reducer motor RF147 flange diameter optional 450 or 550, reducer model GKAF157-11-6P-12325-M1-B-I gearbox gears F37 gear ratio: 2363,28.09,10.42,23.63,58.32,43.83 equal speed ratio. Reducer model GKAF167-15-6P-135-M1-B-I large torque hard tooth surface helical gearbox oil seal adopts imported double seal lip oil seal, which has extremely high dustproof and anti-oil leakage capacity.
grf97-8.39-Y22-4P Gear Reducer Motor MB04-15-75-0The 55kw transmission spindle is made of high-purity alloy steel 40cr quenched and tempered, which has a high suspension load capacity. ka57-108.03-y0.55-6P-M2-90° Reducer Motor Gearbox RD means (Twin Shaft Type) Foot Shaft Extension Mounting, Shaft Input. rxf77-4.39-3KW reducer motor RF47-DV100M4-4The combination of helical gear and worm gear of the 85-m1-0 gearbox has a compact structure and a large reduction ratio. mtja67-45.5-2.2kw