Glass rotameter is a commonly used flow measuring instrument, which is widely used in the measurement and control of liquid flow. In order to ensure its accuracy and reliability, regular care and maintenance are very important. The following will introduce some common sense of maintenance of glass rotameter.
AI Assistant Creation Season 1. Regularly clean the measurement part of the glass rotameter, which is a glass rotor, which is susceptible to contamination and wear. Therefore, regular cleaning is required. When cleaning, special cleaning agents and cleaning tools should be used to avoid the use of corrosive substances such as strong acids and alkalis. After washing, it should be wiped clean with a clean cloth and dried before installation and use. 2. Check the position of the rotorDuring use, the position of the glass rotor is easy to change. Therefore, the position of the rotor needs to be checked regularly. If the rotor position is found to be incorrect, it should be adjusted in time to ensure that it is perpendicular to the pipe and in the correct measuring position. 3. Check the connectorsThe connectors of the glass rotameter are susceptible to corrosion and wear. Therefore, the connections need to be checked regularly for looseness, damage or corrosion. If there is a problem with the connection, it should be replaced or repaired in time to ensure that it is tightly and firmly connected to the pipeline. 4. Check the power supply and signal linesThe power supply and signal lines of the glass rotameter are susceptible to damage or aging. Therefore, it is necessary to check whether the power supply and signal lines are working properly on a regular basis. If a problem is found with the power supply or signal cable, it should be replaced or repaired in time to ensure that it is working properly. 5. Regular calibrationIn order to ensure the accuracy and reliability of the glass rotameter, regular calibration is required. When calibrating, professional calibration equipment and methods should be used and the prescribed operation steps should be followed. After calibration, the calibration results should be recorded and the calibration certificate should be kept. 6. Avoid violent vibration, and the glass rotameter is easily affected by violent vibration. Therefore, during use, severe vibration or impact should be avoided. If the glass rotameter is found to be subjected to severe vibration or impact, it should be stopped and inspected in time. 7. Pay attention to the installation environmentThe installation environment of the glass rotameter also has a certain impact on its accuracy and reliability. Therefore, during the installation process, a suitable installation location and environment should be selected. At the same time, care should be taken to keep the pipeline clean and dry to avoid impurities and moisture entering the measurement part. In conclusion, the care and maintenance of glass rotameters is very important. Through measures such as regular cleaning, inspection, calibration, and attention to the installation environment, its accuracy and reliability can be ensured, and its service life can be prolonged. At the same time, care should be taken to avoid problems such as violent vibration and impact during use.