There are some common problems that may be encountered during the use of the laboratory smart alcohol analyzer, and the following are some common problems and their solutions:
Inaccurate measurements: This can be caused by things like the instrument not being properly calibrated or the sensor aging. The workaround is to recalibrate or replace the sensor.
The instrument cannot start properly: It may be caused by a power failure, an internal failure of the instrument, etc. The solution is to check if the power connection is normal, if there is an internal fault, you may need to contact the manufacturer for repair.
The measurement results fluctuate greatly: they can be caused by, for example, impurities in the sample or gas instability. The solution is to ensure that the sample is pure and to minimize the influence of environmental factors.
Abnormal instrument display: It may be caused by a faulty display or a circuit problem, etc. The solution is to check if the monitor is normal, if it needs to be repaired, you may need to contact the manufacturer for repair.
It should be noted that the above solutions are for reference only, and the specific solutions need to be judged and dealt with according to the specific problems and instrument specifications. When using the laboratory smart alcohol analyzer, it is recommended to carry out regular maintenance and calibration operations to ensure the normal operation of the instrument and the accuracy of the measurement results.