First, the principle of the community barrier.
The community barrier is a common traffic management equipment at the entrance and exit of the community, and its working principle is mainly based on the motor, control circuit and mechanical transmission part. When a vehicle or pedestrian approaches the barrier, the sensor will detect the signal and transmit it to the control circuit, and the control circuit controls the motor according to the preset program, so that the motor drives the transmission part to lift or fall the barrier, so as to realize the passage of vehicles or pedestrians.
Second, the maintenance of the community barrier.
1.Repair of mechanical parts.
The maintenance of the mechanical part mainly includes the inspection and adjustment of the transmission device and the brake rod. The transmission device should be checked regularly for looseness or damage, and fastened or replaced in time. At the same time, it is necessary to ensure the horizontality and verticality of the gate rod, and adjust it in time if there is any deviation. In the daily use of the brake pole, care should be taken to avoid collision with vehicles or pedestrians to avoid damage.
2.Repair of control circuits.
The maintenance of the control circuit mainly includes the inspection and replacement of the circuit board, sensor and power supply. The circuit board should be checked regularly for ablation or loosening, whether the sensor is working properly, and whether the power supply is stable. If there is a problem, it should be repaired or replaced in time. During maintenance, it is necessary to pay attention to the power-off operation to avoid safety accidents such as short circuit or electric shock.
3.Repair of motors.
The maintenance of the motor mainly includes the inspection and replacement of the motor windings and bearings. The motor windings should be regularly checked for ablation or loosening, and whether the bearings are operating normally. If there is a problem, it should be repaired or replaced in time. When repairing, pay attention to the model and specification of the motor to avoid mismatch or safety hazards.
4.Routine maintenance and upkeep.
In addition to regular maintenance, daily maintenance and maintenance are also very important. Dust and debris on the surface of the barrier should be cleaned regularly to keep the appearance of the barrier clean and tidy. At the same time, it is necessary to regularly check whether the functions of the barrier are normal, and if there is any abnormality, it should be dealt with in time. In addition, the barrier gate should be lubricated regularly to ensure the smooth operation of the mechanical part.
In conclusion, the maintenance of the community barrier gate is an important job that needs to be carried out regularly and kept in good condition. Only through reasonable repair and maintenance can we ensure the normal operation of the barrier gate and improve the efficiency and quality of community traffic management.