Laboratory centrifuges can often be equipped with multiple rotors with different capacities, and adapters are the changeover. When two centrifuge tubes with different centrifugal capacities are required in the same centrifuge, an adapter can be placed in the large-capacity rotor to convert into small-capacity test tubes, which can not only avoid the complicated process of disassembling the rotor when changing the rotor, but also save the experimental cost. The adapter converts large capacity to small capacity, easy to use, low cost, and is a cost-effective centrifuge accessory!(Note: The adapter is limited to large-volume to small-volume tubes.) ）
If the centrifuge rotor configuration is not complete, and you want to centrifuge centrifuge tubes or centrifuge bottles of different capacities, you do not need to buy a rotor, you can choose an adapter of the appropriate size for conversion, and the adapter size can also provide professional drawing, free design, and personalized customization according to needs.
1.5ml to 02ml/0.5ml
10ml round bottom turn 15ml/5ml
15ml culet turn 15ml 5ml, 15ml round bottom to culet bottom.
50ml culet to round bottom (round bottom to culet ml culet 15ml 5ml 10ml 15ml, 50ml to 3ml 10ml 20ml 30 syringe adapters.
100ml to 5ml 7ml 10ml 15ml 50ml
250ml to 10ml 15ml 50ml
300ml adapter (adapted to Zhongke Zhongjia KDC-1042).
500ml to 5ml 10ml 15ml 50ml
750ml to 15ml 50ml 500ml
1000ml to 10ml 15ml 50ml 100ml