1. What is the density of H13 steel?
1. The density of H13 is 85g per cubic centimeter H13 alloy steel heat treatment quenching: stage preheating: 500 550 stage preheating: 750 800 blowing cooling or high-pressure gas cooling, etc., 100 150 into the tempering furnace. Tempering: Preheating: 300 350 Tempering heating: 550 680 Air cooling to room temperature, tempering three times.
2. The density of H13 die steel is generally 85kg cubic decimeters, the heat treatment strength is in HRC 48 52, it has good ductility and good thermal strength, thermal fatigue performance and certain wear resistance, and the comprehensive performance is good at 600, the cutting performance is high (air quenching can harden), and the quenching and tempering deformation rate is low.
3. [1] The density of H13 steel is 85 kilograms of cubic decimeters.
2] Steel: steel is widely used and varied, according to the different cross-sectional shapes, steel is generally divided into four categories: profiles, plates, pipes and metal products. Steel is a material of a certain shape, size, and properties that ingots, billets, or steel are made by pressure processing.
4. The density of H13 steel is 85 cubic decimeters. "H13 belongs to hot work die steel, which is a steel grade formed by adding alloying elements on the basis of carbon steel, and the standard GB T1299-2014 is implemented. H13 belongs to hot work die steel, which is a steel grade formed by adding alloying elements on the basis of carbon steel, and the standard GB T1299-2000 is implemented.
5. What is the chemical composition and density of H13 material Grade: H13, hot work die steel, chemical composition: , carbon C: 32 45, manganese Mn: 20 50, phosphorus P: 030, sulfur S: 030, silicon Si: 80 20, chromium Cr: 75 50. The density of vanadium V:80 20,H13 steel is 85 kg cubic decimeter.
6. The physical properties of H1 steel are shown in Table 2, with a density of 8g cm3 and an elastic modulus of 210,000MPa. The carbon content in the steel determines the matrix hardness of the quenched steel. The names and carbon content of steel grades similar to H13 steel in various countries are shown in the table, and the International Organization for Standardization calls H1 steel 40CRMOV steel.
2. What is the chemical composition and density of H13 material?
1. The density of H13 steel is 85 kg cubic decimeters. The chemical composition of H13 steel of H13 die steel H13 steel is C-CR-MO-SI-V shaped steel, which is extremely widely used in the world, and many scholars in various countries have conducted extensive research on it and improved its chemical composition.
2. What is the chemical composition and density of H13 material Grade: H13, hot work die steel, chemical composition: carbon C: 32 45, manganese Mn: 20 50, phosphorus P: 030, sulfur S: 030, silicon Si: 80 20, chromium Cr: 75 50. The density of vanadium V:80 20,H13 steel is 85 kg cubic decimeter.
3. The chemical composition and mass fraction of H1 steel in Table H1 (W %) The physical properties of H1 steel are shown in Table 2, and its density is 8g cm3, and the elastic modulus E is 210000MPa. The carbon content in the steel determines the matrix hardness of the quenched steel.
4. What is the density of span3 mold steel chemical surface fraction of span3 mold steel Baosteel span3 mold steel** span3 hot work die-casting mold steel span3 hardness Dongguan mold steel, mold steel. Mold steel chemical composition.